DAM HINGE Assembly

Text of DAM HINGE Assembly

The utilitarian Hinge unit is available in

various colours and configurations: 1 door, 3 door or 4 door. Assembly Depending on how your product was delivered and packaged some steps in this manual can be skipped as you might receive a fully or partially-assembled product. Care and maintenance Go to www.dokterandmisses.com/care for specific instru

Lay the steel body of the Hinge unit

(Part A) upside down on a blanket or bubble-wrap as shown above. NOTE Make sure that the doors of the unit are held / taped closed while flipping the unit. how to assemble this product Step 2 Unscrew the screws with black washers from the wooden legs (Part B), match the coloured stickers and align the corresponding

Insert screws, together with washers and

tighten using the allen key provided. Use a screw driver to hold the screws in the wooden legs in place while tightening. Step 4 Turn the unit over (2 people required) and tighten screws. NOTE: Tighten screws from time to time.

thank you for recycling

Please support responsible environmental management by recycling product packaging. we really do care We make each product with great care and attention to detail. If you experience any problems with this product, please let us know. We are always working to improve on our products. Your feedback is valuable to us.

DAM Indoor Furnishing Owners Instructions: