Daiichi Electronics SVLC-110L Instruction Manual

(VOLTMETER) SVLC-110L [ 1φ2W / 1φ3W / 3φ3W ANALOG OUTPUT ] HARDWARE MODEL C [ Green backlight ] HARDWARE MODEL F [ White backlight ] ...

Read this instruction manual carefully before installation, wiring, and using this product. Keep this instruction manual handy for reference at any time. Have a contact with us or sales agent in case that this instruction manual is lost or damaged. Have a contact with us when y ...

Places where corrosive gas (SO2 / H2S / etc.)(１) is generated. Places where dust is generated. Places with much vibration and shock. Places with influence of external magnetic field (２). Note (１) Corrosive gas = Sulfur dioxide SO2 / Hydrogen sulfide H2S / e ...

1. Environment of usage and storage. Don’t mount or store this product in the following environments. If the unit becomes defective due to the use in an environment other than specified, it may be repaired for pay even during its warranty period (one year after the date of delivery). ① Don’t mount or store the un ...

malfunction of the unit. If setting should be wrong, neither measurement nor output becomes correct. Carefully read the instruction manual before setting the unit. ■ Default setting The default settings are as speci ...

 Use the input within the rated range. Be careful since negligence of this caution may cause troubles of the unit.  There is a function to hold the maximum value and the minimum value with a measurement factor in this product. A blackout is guaranteed and this value isn't a ...

1.1 Usage of product ･･････････････････････････････････････ ...

1.1 Usage of product This single unit can measure and monitor voltage ×3, frequency. It is optimum for voltage measurement of a power receiving, a bus, and a low voltage system. The intensive monitor doubled with the system by option (analog output, alarm output, external operation input) addendum is possible. 1.2 Features ...

Bar graph display The measurement value of the main monitor is indicated by the analog. (Setting which does bar graph display of the measurement value of sub monitor is also possible.) Scale markings It sets automatically by measurement-range setting. In setting mode, it is used as a switch that changes a ...

dimensions drawing and panel cutout. Fasten these nuts with tightening torque 2.0～2.5N･m. ● Dimension diagram ● Caution on handling Mount the LCD to obtain an optimum angle, since the contrast c ...