Dahua ITC237-PU1B-IR Web Operation Manual

1．Electrical safety All installation and operation here should conform to your local electrical safety codes. The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited power source is rated 90-240V. We assume no liability or responsibility for all the fires or electrical shock caus ...

Contact your local retailer ASAP if something is broken in your package. 7. Daily Maintenance Please shut down the device and then unplug the power cable before you begin daily maintenance work. Use the dry soft cloth to clean the device. If there is too much dust, p ...

 This manual is for reference only. Slight difference may be found in the user interface.  All the designs and software here are subject to change without prior written notice.  All trademarks and registered trademarks mentioned are the properties of their respective owners.  If there is any uncertainty or controversy, please ...

1 Web ............................................................................................................................... 1 1.1 First Time Log in ............................................................................................... 1 1.2 Non-first Time Login .......................................................... ...

4.5.1 Point ......................................................................................................... 43 4.5.2 Local ...................................................................................................... ...

Note: Interface and settings here are for reference only. 1.1 First Time Log in Open IE and input HD intelligent traffic camera IP address in the address column. For example, if your IP is 192.168.1.108, then please input http:// 192.168.1.108 in IE address column. See Figure 1-1 IE. Fig ...

After installation, the interface is shown as below. See Figure 1-3. Please input your user name and password. Follow system instructions to change password, and click OK. Default factory name is admin and password is admin. Note: For security reasons, please modify your password after you first login. You can go to Setup>Syste ...

After you logged in, HD intelligent traffic camera web homepage is shown as in Figure 1-4. Note: Download and install plug-in if you cannot enter the homepage. Figure 1-4 Web Homepage ...

Step 1. Open IE and input HD intelligent traffic camera IP address in the address column. Step 2. Please input your user name and password. Click Login. 1.3 System Menu System menu is shown as in Figure 1-5. Figure 1-5 System Menu Tab Function Preview Installation debugging, adjust video and image window, record video and image, se ...