Dentsply Sirona Schick AE Getting Started
Read Online
Read the Dentsply Sirona Schick AE Getting Started online using the built-in PDF viewer.
Key Pages of Document
Schick AE Please Read This First For complete details about your Schick AE system and the latest software, please visit our website at http://dsgo.to/schick ...
Page 2 Congratulations on the purchase of your Schick AE system. Schick AE combines high-resolution image acquisition with dynamic, user-controlled image sharpening, and an easy-to-use design that includes in-office serviceable cables. The Schick AE system acquires intraoral X-ray images and transmits them by USB connection to desktop or laptop PCs. There are two main devices in the system: the Schick AE Sensor, which acquire ...
Page 3 Schick AE at a Glance Connection status LED Sensor Status LED USB Cable USB Interface Schick AE Sensor Connects to laptop or desktop PC USB port or hub Schick AE Connections and LED Indicators Schick Schick AE Sensor ...
Page 4 1. Prepare for Installation » » Exit Sidexis 4. » » Verify that the Schick AE Sensor USB Interface is NOT connected to the PC. If connected, disconnect the USB Interface by unplugging the USB cable. 2. Install the Sidexis 4 Sensor Plugin » » Please type the following link http://dsgo.to/schick into your browser, press Enter, and click on the Schick AE and Sensors link to download the latest driver and firmware fo ...
Page 5 Installation (continued) 4. Connect the AE Sensor and USB Interface » » Connect the Schick AE Sensor cable to the USB Interface. » » Connect the USB cable to the USB Interface. » » Click on the Devices link on the configuration page. NOTE: If the Devices link isn’t shown, clear your browser cache and refresh the page. » » Select the device and make sure that the hardware versions are up-to-date. » » Close t ...
Page 6 LED Indications Connection Staus LED Indications USB Interface Indication Description Not connected OFF Cable is not connected. Check cable connection to PC. Connected AMBER USB Interface is connected and powered but no connection to imaging software is detected. Connected GREEN “breathing” Ready for acquisition. Connected GREEN “pulsing” Sidexis server not configured (from Sensor Plugin Configuration page). ...
Page 7 LED Indications (continued) Sensor Status LED Indications Sensor Indication Description Not connected OFF Sensor is not connected. Connect sensor and start Sidexis 4 (or other imaging program). Connected AMBER Error condition, such as incompatible sensor. Connected GREEN Schick AE Sensor and USB Interface are connected. Sidexis is configured properly and has detected the USB Interface. Start Sidexis 4 (or other imaging ...
Page 8 Clinical Tasks Schick AE Sensors and supporting software enable the clinician to optimize image presentation to a level appropriate for the treatment being performed. Four clinical tasks are available: Endodontic, Periodontic, General Dentistry, and Restorative. How they work The different tasks optimize the contrast and brightness of the image to improve visibility of the anatomical structures important for that clini ...
Page 9 Clinical Tasks (continued) Image sharpness and clinical tasks In addition to contrast optimization, the visibility of some anatomical structures benefit from additional image sharpening. A slider control is available to dynamically change the level of image sharpness in real time after acquisition. In addition, the slider can be used to change the initial sharpen level for each clinical task using the Save As Default b ...
Page 10 Safety and Compliance Check Schick Sensor, USB Interface, and USB Cable before Using Them Before each usage, check the outer surface of the Sensor and cable, the USB Interface, and the USB cable for any signs of physical damage or defect. Sensor and USB Interface surfaces should have a smooth finish, with no evidence of chipping or damage and the cables should appear undamaged. If visual defects are detected, disconti ...
Page 11 Safety and Compliance (continued) Any instrumentation or equipment for professional use located near the Schick AE Sensor and USB Interface must conform to Electromagnetic Compatibility regulations, to which the EMC tables in the User Guide serve as guidance. Non-conforming equipment, with known poor immunity to electromagnetic fields, may not operate properly unless they are installed at a distance of at least 10 fee ...
100007081 Sirona Dental, Inc. 30-30 47th Avenue, Suite 500 Long Island City, New York 11101 USA Sirona Dental Systems GmbH Fabrikstr. 31 D-64625, Bensheim Germany Part Number 100007081 Rev. 2 Copyright © 2019 by Dentsply Sirona, Inc. All Rights Reserved (Publication date 8/8/2019) Protect Sensor from Potential ESD Damage Like other electronic devices, your Schick AE Sensor is susceptible to electrostatic discharge (ESD), ...
