Danrou KCM-7790DR Manual 

Text of the manual

850nm IR Led visible distance up to 15m

 9” TFT Lcd Digital panel (800 RGB x 480)  Two way audio  Scan function  PIR trigger or Video motion detect alert& recording  Manual recording  Touch button operation  Schedule recording separate settings from Monday to Sunday  Micro SD Card capacity up to 64GB  One LCD mo

Front Panel buttons

1. LCD Screen – Displays video from the camera(s) or displays system operations. Item Button Function 2. :Talk back Enable two-way audio Intercom 3. : Motion Recording Activate / deactivate motion recording. 4. : Manual Recording Activate / deactivate manual recording.

: Change Channel

Switch between connected cameras. 6. : Quad / Sequence Mode Switch between Sequence and Quad (up to 4-channels) viewing mode. 7. : Zoom Switch between 2x digital zoom and normal viewing mode. 8. : Delete File Delete highlighted files in Playback mode. 9. : Menu Open Main Menu. Return to previous menu / exit menus. 10. : Joystick Move left

6. Ethernet Port (RJ45): Connect the receiver to your router using the included Ethernet cable to enable

smartphone / tablet connectivity. 7. Power Port: Connect to a local power outlet using the included power adapter. 8. Volume Controls: Turn the receiver volume up and down. 9. micro SD Card Slot: Insert up to a 64GB micro SD card. 10. USB Port: Used for s

6. Wall Mounting Bracket – Use the bracket to mount the camera on a wall or other flat surfaces.

7. AC Adaptor Jack – Plug the AC adaptor to the jack for camera’s power supply. 8. Pair Button – The pair button is located on the back of the camera, it is used to pair the camera with receiver. Note: This camera includes an Auto Mechanical IR Cut Filter

Wall Ceiling Counter

NOTE: For ceiling installation, position the antenna as high as the ceiling allows. See the"Ceiling" mounting position in the figure above. To Install the Cameras 1. Use the included mounting screws to mount the camera to the mounting surface: · Mark the positions of the screw hole

NOTE: Power cables are only weatherproof when fully inserted at the connection point.

Power cables may not be submerged in water. Make sure is the DC 9V for camera, and DC 5V for Receiver Make sure the power adaptor is placed into a grounded outlet or surge bar to protect the camera from power fluctuations. 1 Using the system By default, the camera(s) includ

1 Signal Indicator –The signal indicator shows the strength of the signal being received from the

camera. The number of bars in the Signal Indicator shows the strength of the signal. One or no bars indicates the signal is poor, and 4 bars indicate a very strong signal. Note • If the signal is low (e.g.,1 or 2 bars) adjust the antennas

Other Security System Manuals