DFRobot Beetle Shield Quick Start Manual

 4 Pinout  5 Projects and products using the Beetle shield Introduction The Beetle shield is designed to attach a Beetle controller for easy connecting servos and sensors. ...

 Compatible with DFRobot Beetle Attaching the Beetle controller to the Beetle shield Note: For Beetle shield versions lower than v1.1 the label for D9 and D11 is switched. The pin labeled with D9 on the shield goes to D11 on the Beetle and D11 on the shield is going to D9 on the Beetle. Please take the labels on ...

and – besides the USB socket. The other two power pads on the other side of the Beetle are not connected with the shield but you still can use them as a power source since they are routed to the power lines on the Beetle itself. Beetle shield pinout (cl ...