Dometic CDF-11 Operating Manual
Text of Dometic CDF-11 Operating Manual
Please read this operating manual carefully before starting the device.
Keep it in a safe place for future reference. If the device is passed on to
another person, this operating manual must be handed over to the user
along with it.
The manufacturer cannot be held liable for damage resulting from improper usage
or incorrect operation.
Contents
1
Explanation of symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Explanation of symbols
BordBar CDF11
4
1
Explanation of symbols
!
!
A
I
WARNING!
Safety instruction: Failure to observe this instruction can cause fatal or
serious injury.
CAUTION!
Safety instruction: Failure to observe this instruction can lead to injury.
NOTICE!
Failure to observe this instruction can cause material damage and impair
the function of the product.
NOTE
Supplementary information for operating the product.
Do not operate the device if it is visibly damaged.
•
If this device's power cable is damaged, it must be replaced by the
manufacturer, customer service or a similarly qualified person in order
to prevent safety hazards.
•
This device may only be repaired by qualified personnel. Improper
repairs can lead to considerable hazards.
•
This device can be used by
Only connect the device as follows:
–
With the DC cable to a DC plug socket in the vehicle (e. g.
cigarette lighter)
–
Or with the 230 V connection cable to the 230 V AC mains supply
•
Connect the device with the 230 V connection cable to the 230 V
mains supply.
•
Never pull the plug out of the socket by the cable.
•
If the cooler is connected to the DC socket: Disconnect the cooler and
other power consu
Protect the device and the cable against heat and moisture.
3
Intended use
The cooler CDF11 (ref. no. 9105303076) is suitable for cooling and freezing
foodstuffs.
The device has been designed for use with a 12/24 Vg on-board power supply
socket of a car (cigarette lighter) or caravan.
The appliance may also be used for camping use. The appliance shall not be
exposed to rain.
A
I
4
Scope of delivery
•
Cooling device
•
The cooler can chill products, keep them cool as well as freeze them. A
maintenance-free refrigerant circuit with compressor provides the cooling.
The cooler is suitable for mobile use.
When used in vehicles the cooler can be secured with the seat belt.
If an error occurs within the interior electronics, the cooling can be kept by using an
emergency switch.
5.1
Description of the device
EMERG
Fixing position for seat belt
4
Interior LED light
5
Cooling compartment
6
Freezer compartment
7
Lock
8
Skid proof pad
9
Handles
10
Carry strap
11
Connection socket
12
Emergency switch
Switches the cooler on or off when the button is pressed for
between one and two seconds
2
POWER
Status indication
LED lights up green
Compressor is on; preset
temperature isn’t reached
yet
LED lights up orange
Preset temperature is
reached
LED flashes orange
Insufficient voltage
3
ERROR
LED flashes red
Device is switched on but
not ready for operatio
The device is equipped with an interior LED light which remains on whenever power
is connected. The power consumption of this LED light is extremely low and
insignificant compared to the overall power consumption of the device.
6.1
Before initial use
I
6.2
Energy saving tips
•
Choose a well ventilated installation location which is protected against direct
sunlight.
•
Allow warm food to cool down first before p
Securing the cooler in the vehicle
➤Open the lid of the cooler.
➤Place the seat belt into the fixing position (fig. 1 3, page 8) of the cooler.
➤Close the lid.
➤Fasten the seat belt and tighten it.
6.6
Switching-on the cooler
A
The cooler can be operated with 12 V or 24 Vg.
For safety reasons the cooler is equipped with an electronic system to prevent
polarity reversal. This protects the cooler against short-circui
➤Press the “ON/OFF” button for three seconds.
✓The “POWER” LED (fig. 2 2, page 10) lights up green.
When the cooler reaches the preset temperature, the LED lights up orange.
✓The display (fig. 2 5, page 10) switches on and shows the current cooling
temperature.
✓The cooler starts cooling the interior.
6.7
Setting the temperature
➤Press the “SET” button once.
➤Use the “+” and “–” buttons to sel
Selecting the temperature units
You can switch the temperature display between Celsius and Fahrenheit. This is how
to do it:
➤Switch on the cooler.
➤Press the “SET” button twice.
➤Use the “+” and “–” buttons to select Celsius or Fahrenheit.
✓The selected temperature units then appear in the display for a few seconds. The
display flashes several times before it returns to the current temperature.
The d
This is how to select the battery monitor mode:
➤Switch on the cooler.
➤Press the “SET” button three times.
➤Use the “+” and “–” buttons to select the battery monitor mode.
✓The selected mode then appears in the display for a few seconds. The display
flashes several times before it returns to the current temperature.
I
I
6.9
Switching off the cooler
➤Empty the cooler.
➤Switch the cooler off: Press the
Defrosting the cooler
Humidity can form frost in the interior of the cooling device or on the vaporiser. This
reduces the cooling capacity. Defrost the device in good time to avoid this.
A
To defrost the cooler, proceed as follows:
➤Take out the contents of the cooling device.
➤If necessary, place them in another cooling device to keep them cool.
➤Switch off the device.
➤Leave the cover open.
➤Wipe off the defro
Cleaning and maintenance
17
7
Cleaning and maintenance
!
A
➤Occasionally clean the device interior and exterior with a damp cloth.
➤Make sure that the air inlet and outlet vents on the device are free of any dust and
dirt, so that heat can be released and the device is not damaged.
WARNING!
Always disconnect the device from the power supply before you clean
and service it.
NOTICE! Risk of damage
•
Never clean the cooler under running
Device does not function,
“POWER” LED does not
glow.
There is no voltage
present in the
12/24 V socket
(cigarette lighter) in
your vehicle.
The ignition must be switched on in
most vehicles to apply current to the
cigarette lighter.
The device does not cool
(plug is inserted, “POWER”
LED is lit).
Defective
compressor.
This can only be repaired by an
authoris
➤Place the packaging material in the appropriate recycling waste bins wherever
possible.
M
If you wish to finally dispose of the product, ask your local recycling centre
or specialist dealer for details about how to do this in accordance with the
applicable disposal regulations.
10
Technical data
I
The coolant circuit contains R134a.
BordBar CDF11
Ref. no.:
9105303076
Gross capacity:
10.5 litres
Connection voltage:
Dometic Austria GmbH
Neudorferstraße 108
A-2353 Guntramsdorf
+43 2236 908070
+43 2236 90807060
Mail: [email protected]
BENELUX
Dometic Branch Office Belgium
Zincstraat 3
B-1500 Halle
+32 2 3598040
+32 2 3598050
Mail: [email protected]
BRAZIL
Dometic DO Brasil LTDA
Avenida Paulista 1754, conj. 111
SP 01310-920 Sao Paulo
+55 11 3251 3352
+55 11 3251 3362
Mail: [email protected]
DENMARK
Dometic Denmark A/S
Nordensvej 15, Taulov
DK-