Displays2go LCTKD Assembly Instructions
Text of Displays2go LCTKD Assembly Instructions
- Cam & Connecting Bolts (14 required)
Components:
(1) Front Panel
(2) Side Panels
(1) Top Platform w/ Lip
(1) Shelf
Step #1
It's easiest to begin by laying out all the panels on
a carpeted area as shown in the diagram below.
Step #2
While still on the floor, begin inserting the (14) cams & connecting
bolts into the panels. The cams should be inserted so that the
opening of the cam is facing toward the respective opening on
the edge of the panel
(A) With the Front Panel lying down & cams inserted, take one of the Side Panels and align the connecting bolts with
the holes on the Front Panel. Use a screwdriver to tighten the cams & lock them into place. (B) Next, attach the shelf
using the same technique... align the connecting bolts up with the holes & tighten cams. (C) Finally, attach the
second Side Panel by aligning the connecting bolts with the holes on both the Front Panel & Shelf...