Digisol DG-BG4300NU/IS Faqs
Text of the manual
HOW TO CONFIGURE DG-BG4300NU/IS IN 3G FAILOVER MODE WITH DSL LINE
STEP 1: CONNECT DONGLE TO ROUTER
Make sure the internet is working from Dongle first
After connecting it to router, check with the USB led on the router
STEP 2: ACCESSING THE WEB CONFIGURATION PAGE INSIDE THE ROUTER
Open the configuration page of the router by typing http://192.168.1.1 in a we
STEP 3: CONFIGURE WAN 3G SETTINGS
Click on Setup >> WAN. Then click on 3G/4G on the left hand side.
3G/4G WAN : Enable
Network Type : Auto
APN : According to the ISP ( Ex : For Jio Sim: jionet )
Dial Number : *99#
3G to WAN Switch Over Time(s) : 10
Check the WAN 3G Connections Table
Click on Apply Changes.
STEP 4: CHECK THE DONGLE STATUS
Status >> 3G/4G Info
Signal Strength
Connection Status : Connected
Sim Card Status : Sim Ready
Now verify the internet access through DG-BG4300NU/IS router.
STEP 5: CONFIGURE THE ROUTER IN PPPOE MODE
Click on Setup > WAN
First delete the entry in WAN Interface Table which is at bottom of the page
WAN Physical Type > Select ADSL WAN
Enter VPI and VCI values as provided by the ISP ( For Ex : For BSNL, VPI – 0 and VCI – 35)
Channel Mode : PPPoE
Enter Username and Password pro
In this case ADSL WAN will be primary WAN by default. In case the DSL link goes down, the router will auto-switch to 3G/4G mode.
Dongle status will get disconnected once the ADSL link is On.