Dynojet Power Commander III USB EX Installation Instructions

2003-2006 SUZUKI SV 650 INSTALLATION INSTRUCTIONS Dynojet Research • 2191 Mendenhall Drive • North Las Vegas, NV 89081 • (800) 992-4993 DOWNLOAD THE POWER COMMANDER SOFTWARE AND LATEST MAPS FROM OUR WEBSITE: WWW.POWERCOMMANDER.COM PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION PARTS LIST qu ...

The ignition must be turned OFF before installation. 1 Remove the main seat and the passenger seat. 2 Prop the front of the fuel tank up using the Suzuki prop rod. 3 Route the PCIII USB EX harness from the tail section towards the engine. 4 Locate the stock, black fuel connector as shown in Figure A. This ...

9 Attach the connectors from the PCIII USB EX to the stock connector and the throttle body as shown in Figure D. 10 Attach the ground wire from the PCIII USB EX to the negative side of the battery as shown in Figure E. 11 Install the PCIII USB EX in the tail section. If you are not going to keep the tool ...