Espressif Systems ESP8266 SDK At Instruction Set

Disclaimer and Copyright Notice Information in this document, including URL references, is subject to change without notice. THIS DOCUMENT IS PROVIDED AS IS WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT, FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY WARRANTY ...

1. Preambles 6 ................................................................................................... 2. Command Description 7 ............................................................................... 3. Basic AT Command Set 8 ............................................................. ...

11. AT+CWSAP_DEF – Default config of softAP mode 26 .................................. 12. AT+CWLIF – IP of stations 26 ..................................................................... 13. AT+CWDHCP – Enable/Disable DHCP 27 .................................................. 14. AT+CWDHCP_CUR � ...

11. AT+CIPMUX – Enable multiple connections 49 ............................................ 12. AT+CIPSERVER – Configure as TCP server 49 ........................................... 13. AT+CIPMODE – Set transfer mode 50 ........................................................ 14. AT+SAVETRANSLINK � ...

1. Preambles This is the documentation for Espressif AT command Command set and usage. Command set is divided into: Basic AT commands, WiFi related AT commands, TCP / IP AT commands. Copy all files in folder "at" to folder "app" in esp_iot_sdk if users need to compile AT. Download: boot.bin, downloads to ...

2. Command Description Each Command set contains four types of AT commands. Notes: 1. Not all AT Command has four commands. 2. [] = default value, not required or may not appear 3. String values require double quotation marks, for example: AT+CWSAP="ESP756290","21030826",1,4 4. Baudrate = 115200 5. ...

3. Basic AT Command Set 3.1. Overview The ESP8266 wireless WiFi modules can be driven via the serial interface using the standard AT commands. Here is a list of some basic AT commands that can be used. 3.2. Commands 1. AT – Test AT startup The type of this command is "executed". It's used to test the se ...

2. AT+RST – Restart module The type of this command is "executed". It’s used to restart the module. 3. AT+GMR – View version info This AT command is used to check the version of AT commands and SDK that you are using, the type of which is "executed". 4. AT+GSLP – Enter deep-sleep mode This comman ...

5. ATE – AT commands echo This command ATE is an AT trigger command echo. It means that entered commands can be echoed back to the sender when ATE command is used. Two parameters are possible. The command returns "OK" in normal cases and "ERROR" when a parameter other than 0 or 1 was specified. 6. AT+ ...