Emerson Rosemount 2501 Quick Start Manual

Text of the manual

Quick Start Guide

00825-0100-2501, Rev AA October 2019 Rosemount ™ 2501 Solids Level Switch Rotating Paddle

Contents Introduction.................................................................................................................................3 Mechanical installation...............................................................................................................11 Electrical installation................................................

The level switch detects the presence and absence of a process media at its

installation point, and reports it as a switched electrical output. Note Other language versions of this Quick Start Guide can be found at Emerson.com/Rosemount. 1.1 Safety messages NOTICE Read this manual before working with the product. For personal and system safety

Failure to follow safe installation and servicing guidelines could result in

death or serious injury. • Ensure the level switch is installed by qualified personnel and in accordance with applicable code of practice. • Use the level switch only as specified in this manual. Failure to do so may impair the protection provided by the level switch. Ex

The products described in this document are NOT designed for nuclear-

qualified applications. • Using non-nuclear qualified products in applications that require nuclear-qualified hardware or products may cause inaccurate readings. • For information on Rosemount nuclear-qualified products, contact your local Emerson Sales Representative. Individu

if it has an extended length, mount it vertically on top of a silo to monitor the

maximum filling limit. The length of the paddle can be up to 158 in. (4 m) with an extension tube or up to 394 in. (10 m) with an extension rope. The use of a sliding sleeve is recommended so that the switching point can be changed easily during the live operation of the level

Using a synchronous motor, the paddle (measuring vane) is driven to rotate

360 degrees. When the vane of the paddle is not covered by a solids medium, a spring pulls the motor and it switches a lug to the left position (Figure 1-2, top illustration). The signal output indicates an 'uncovered' state and the motor rotates the paddle.

The electrical outputs vary depending on the power supply selected when

the Rosemount 2501 was ordered. See the Rosemount 2501 Product Data Sheet for the Power Supply option codes, and Electronics for an overview of the outputs. 1.4 Functions 1.4.1 Selection guide Table 1-1: Rosemount 2501 Selection Guide Type of installation Model option codes 2501L 2501M 2

Shaft sealing and metal material

Table 1-2: Shaft Sealing and Metal Material Application Sealing material(1) Metal Bearing NBR FPM PTFE ALU(2) SST 304 (1.4301) (3) SST Animal feed press * * * Synthetic granules, powders * * Salt * * * Dust filter (for up to 392 °F) * * Dust filter (for up to 302 °F) * * Bitumen * * Cement * * Wood chip dryer * * Pres

Table 1-3: Electronics

Power supply SPDT(1) DPDT(2) FSH/ FSL(3) Output delay(4) Fail safe alarm Ac version 24 or 48 Vac or 115 or 230 Vac * - - - - Dc version 24 Vdc * - - - - Universal voltage 24 Vdc / 22 .. 230 Vac - * * * option (1) Single-Pole-Double-Throw contacts. (2) Double-Pole-Double-Throw contacts. (3) Selectable Fail Safe High or

Other Switch Manuals