Emerson PACSystems RX3i Quick Start Manual

Text of the manual

PACSystems™ RX3i Central Processing Unit IC695CPE302

GFK-3038B Contents User Features ................................................................................. 2 Switches ....................................................................................... 4 Switch Operation ......................................................................

PACSystems™ RX3i Central Processing Unit IC695CPE302

GFK-3038B User Features The PACSystems™ RX3i CPE302 can be used to perform real time control of machines, processes, and material handling systems. The CPU communicates with the programmer via the internal Ethernet port or a serial port. It communicates with I/O and Intelligent Option modules over a

PACSystems™ RX3i Central Processing Unit IC695CPE302

GFK-3038B ▪ Supports most Series 90-30 modules and expansion racks. For supported I/O, Communications, Motion, and Intelligent modules, refer to the PACSystems RX3i Hardware and Installation Manual, GFK-2314 ▪ Supports up to 512 program blocks (Maximum size for a block is 128KB) ▪ Configured with

PACSystems™ RX3i Central Processing Unit IC695CPE302

GFK-3038B Switches The RDSD and Run Mode switches are located behind the front protective door. The Reset switch is not used. Switch operation is given in the following table. Switch Operation RDSD Switches Function Start pushbutton Pressing this switch initiates RDSD data transfer. (The three-positi

PACSystems™ RX3i Central Processing Unit IC695CPE302

GFK-3038B Real-Time Clock Battery The CPE302 is shipped with a real time clock (RTC) battery (IC690ACC001) installed, with a pull-tab on the battery. The pull tab should be removed before installing the CPE302. There are no diagnostics or indicators to monitor RTC battery status. The RTC battery has an

PACSystems™ RX3i Central Processing Unit IC695CPE302

GFK-3038B Serial Port The CPE302 provides one RS-232 serial interface to external devices. This port can be used for firmware upgrades. The port is electrically isolated. For serial port pin assignments and details on serial communications, refer to the PACSystems RX3i CPU Reference Manual, GFK-2222. T

PACSystems™ RX3i Central Processing Unit IC695CPE302

GFK-3038B Energy Pack The CPE302 preserves user memory using an Energy Pack without the need to periodically replace batteries. The IC695ACC400 Energy Pack powers the CPU long enough for the CPU to write its user memory contents to the CPU’s non-volatile storage during a system power loss. Installati

PACSystems™ RX3i Central Processing Unit IC695CPE302

GFK-3038B Green, blinking in unison with OK CPU is in boot mode and is waiting for a firmware update through a serial port. EN — indicates outputs enabled. Green, ON steady Output scan is enabled. OFF Output scan is disabled. CM — indicates activity on the serial communications port. Green, blinkin

Other Computer Hardware Manuals