ELPRO 905U-K Operation & User’s Manual

Tel: +61 7 33524533 Fax: +61 7 33524577 Email: [email protected] Web: www.elpro.com.au User Manual 905U- K Radio Telemetry Module ...

User Manual   ELPRO Technologies Pty Ltd 2001 Page 2 Thank you for your selection of the 905U-K module for your telemetry needs. We trust it will give you many years of valuable service. ATTENTION! Incorrect termination of supply wires may cause internal damage and will void warranty. To ensure your 905U-K enjoys a long l ...

January 2002   ELPRO Technologies Pty Ltd Page 3 FCC Notice: 905U-K Wireless IO Module This user’s manual is for the ELPRO 905U-K wireless module. This device complies with Part 15.247 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference and 2) This device must a ...

User Manual   ELPRO Technologies Pty Ltd 2001 Page 4 Important Notice ELPRO products are designed to be used in industrial environments, by experienced industrial engineering personnel with adequate knowledge of safety design considerations. ELPRO radio products are used on unprotected license-free radio bands with radio ...

January 2002   ELPRO Technologies Pty Ltd Page 5 Limited Warranty, Disclaimer and Limitation of Remedies ELPRO products are warranted to be free from manufacturing defects for a period of 2 years from the effective date of purchase. The effective date of purchase is decided solely by ELPRO Technologies. This warranty does not exten ...

User Manual   ELPRO Technologies Pty Ltd 2001 Page 6 905U-K Radio Telemetry Module USER MANUAL LIMITED WARRANTY, DISCLAIMER AND LIMITATION OF REMEDIES -------------5 1 OVERVIEW----------------------------------------------------------------------------------------8 1.1 AVAILABLE MODELS .................................... ...

January 2002   ELPRO Technologies Pty Ltd Page 7 3.4.1 External Power .......................................................................................24 3.5 INPUT SIGNAL CONNECTIONS...........................................................................24 3.5.1 Digital/Pulse Inputs ......................................... ...

User Manual   ELPRO Technologies Pty Ltd 2001 Page 8 1 OVERVIEW The 905U-K radio telemetry module is an economical solution for the remote monitoring of process signals. The 905U-K can connect to digital, pulse or analogue signals from process transducers, and transmit these signal values by radio. Although the 905U-K is ...

January 2002   ELPRO Technologies Pty Ltd Page 9 • Setpoint Status (digital signal set or reset depending upon the value of the analogue signal compared to a high and a low setpoint value configured in the 905U-K) • Battery Low Voltage (digital signal set when internal battery voltage is low). 1.3 Power Supply The power consump ...

User Manual   ELPRO Technologies Pty Ltd 2001 Page 10 2 OPERATION 2.1 Normal Operation Once configured using the 905U-K configuration software, the 905U-K module will normally be in “sleep” mode to conserve power. During sleep mode, the microprocessor controller powers down, and the analogue loop supply is turned off ...