ETI THERMA WATERPROOF T Operating Instructions

Text of ETI THERMA WATERPROOF T Operating Instructions

INSTRUMENT OPERATION - Connect a

probe via the socket located at the top of the instrument. (The Therma Waterproof uses a miniature type T thermocouple connector). Switch the instrument on and apply the tip of the probe to the substance or medium to be measured. The instrument reading may take a few seconds to stabilise, depending on the nature of the measur

BACKLIGHT - Press the HOLD button for two

seconds. Please note: The backlight will not operate if the low battery symbol is being displayed. (Backlight timeout = 20 seconds). TRIM - Press the MAX/MIN and ON/OFF buttons at start-up for five seconds to enter ('Offset' is displayed). MAX/MIN then cycles (continuous loop) the trim value in 0.1 steps up to ±2.0

GUARANTEE - This instrument carries a

two-year guarantee against defects in either components or workmanship. During this period, products that prove to be defective will, at the discretion of ETI, be either repaired or replaced without charge. This guarantee does not apply to probes, where a six-month period is offered. The product guarantee does not cover

ETI Thermometer Owners Instructions: