Froggit DP60 Manual 

Contents 1. Getting Started ............................................ 2 1.1 Parts List ........................................... 2 2. Overview .................................................... 3 2.1 Features ............................................ 4 3. Setup Guide ................................................ 7 3.1 Installing batteries ............................ 7 3.2 LED Indicator ........................ ...

5.2 Wi-Fi Connection for the Gateway . 16 6. View Online Data with WS View ............. 17 7. Set Email Alerts ........................................ 18 8. Specification ............................................. 21 1. Getting Started 1.1 Parts List One Lightning Detector Sensor One User Manual ...

2.1 Features Lightning Detector  Detects lightning bolts and storms within 25 miles (40 kilometers) ...

meet different requirements.  Long wireless range up to 330 feet (100 meters) in open areas  Transmits readings every 79 seconds  Easy installation includes hanging hole When paired with a froggit DP1500 Wi-Fi Gateway:  Monitor number of strikes daily, and the time & distance of the last strike detected within a 25-mile radius of your location on the Live Data page of the WS View app (requires ...

Weather Station Console:  View lightning data in real-time on the Display  Get alerted to lightning strikes with the flashing lightning icon When uploaded to Ecowitt Weather Server:  View lightning data & history records & graph on the website  Receive email alerts from the server  Remote monitoring with smart phone, laptop, or computer by visiting the website ...

3.1 Installing batteries 1. Remove the battery door on the back of the transmitter by taking off the cover, as shown in Figure 2 Remove the battery door on the back of the , as shown in ...

2. Before inserting the batteries, find the dip switches instruction above the battery compartment and set the following configuration: Indoor/outdoor: Dip switch 1, default setting is for “outdoor”, no matter the sensor is placed indoor or outdoor, set this dip switch to outdoor to avoid system picks up noise and triggering false lightning. Antenna: Dip switch 2, default setting is for long antenna, as this is the ant ...

missed lightning detection, then you may try with Dip switch 1 for “Indoor” setting to make the system even with higher gain and make the system most sensitive. Default for all the 4 switches are in Down Position. ...

The LED indicator will turn on for four seconds and normally flash once every 79 seconds (the sensor transmission update period). Note: If no LED lights up or stays lit permanently, make sure the batteries are inserted the correct way or a proper reset happens. Do not install the batteries backwards. You can permanently damage the sensor. 4. Close the battery door. 3.2 LED Indicator Flash (each): Indicates one packet of ...

signals, prompting the user that current location has high level noise. You can either set dip switch 3, 4 to mid or low sensitivity level which raised to a higher threshold level for noise filtering, or you can find another location for lower noise level. Steady on (for 2S): Indicates detection of interference signals. It means there is lightning like signals around. You should try to find interference sourc ...

The sensor can be placed both indoor or under porch, balcony. To mount or hang the unit on a wall or wood beam:  Use a screw or nail to affix the remote sensor to the wall, as shown on the left side of figure 4, or  Hang the sensor using a string, as shown in right side of figure 4. ...

Note: Make sure the sensor is mounted vertically and not lying down on a flat surface. This will insure optimum reception. Wireless signals are impacted by distance, interference (other weather stations, wireless phones, wireless routers, TVs and computer monitors), and transmission barriers, such as walls. In general, wireless signals will not penetrate ...

example). 5. Wi-Fi Configuration with gateway To view the lightning data on your mobile application and receive email alerts on our weather server, you need to pair this device with our DP1500 Wi-Fi Gateway or HP1000SE PRO Weather Station (sold separately). 5.1 Pair with Gateway If the DP1500 has been in operation, and you have never had any DP60 lightning detection sensor setup before, just power up the sensor an ...

DP1500 before, and you have a new DP60 sensor to replace the old one, just power off the old sensor and power on the new sensor, the gateway will pick up the new sensor data automatically. You may also go to the Sensor ID page of the app (requires the Wi-Fi configuration done first) to Re-register the sensor if not picked up automatically. 5.2 Wi-Fi Connection for the Gateway For this part, please refer to the manua ...

When the Wi-Fi configuration is done, you may view lightning data as well as the sensor battery level on WS view App at the live data page. you may as well as the sensor battery level on WS view App at the live data page. ...

using the same network to view your sensor data on the WS View app. To remote monitor the sensor data, please upload the data to free Ecowitt Weather Server: https://www.ecowitt.net. Detailed operation instructions can be found on the DP1500 manual. 7. Set Email Alerts Once your device is added successfully on the Ecowitt Weather server, you may set alerts for the lightning distance and daily count on the ...