GAS ENVIRO Manual 

EC OUTTAKE EC INTAKE Exit 1 Max. Load 13 AMP Exit 2 Temp Humidity Day/Night Fan powered by SAVE EXIT ENTER EXIT 2 Max. Load 2200W EXIT 1 Max. Load 2200W AC FAN INTAKE AC FAN OUTTAKE GLOBAL AIR SUPPLIES UK 13 AMP ENVIRO CONTROLLER ...

EC OUTTAKE EC INTAKE Exit 1 Max. Load 13 AMP Exit 2 Temp Humidity Day/Night Fan powered by SAVE EXIT ENTER EXIT 2 Max. Load 2200W EXIT 1 Max. Load 2200W AC FAN INTAKE AC FAN OUTTAKE IN THE BOX CONTENTS TECHNICAL SPECIFICATION MOUNTING YOUR UNIT 1 x 13 AMP enviro controller 1 x Power supply cable 1 x Sensor c ...

• The best position for the sensor is the middle of the grow room, just above the canopy. PLEASE NOTE: We advise you have good air circulation in your grow room, this will prevent hot spots or high humidity zones. The sensor will be more accurate if the air is moving inside the grow room, therefore making the contro ...

EC OUTTAKE EC INTAKE Exit 1 Max. Load 13 AMP Exit 2 Temp Humidity Day/Night Fan powered by SAVE EXIT ENTER EXIT 2 Max. Load 2200W EXIT 1 Max. Load 2200W AC FAN INTAKE AC FAN OUTTAKE USING YOUR 13 AMP ENVIRO CONTROLLER 1 2 3 5 4 6 11 13 12 14 7 10 9 8 KEY 1 LCD information display 2 LED indication light ...

you information about your grow room. When the controller is turned on, all 5 lights will briefly illuminate, then go off. The controller is operated ...

GENERAL SETTINGS MENU This menu allows you to change the main settings of the controller such as: • Set Time • Set Language • Set Photosensor • Set Display • Reset to factory Settings • EC Fan Signal TO ACCESS THE GENERAL SETTINGS MENU From the Main Menu – Home Screen press ENTER to access the sub menus. ‘S ...

From the General Settings Menu (see page 6), press DOWN and scroll down to ‘Set Language’. With ‘Set Language’ blinking, press ENTER to access the language settings. Use the UP and DOWN arrows to select your chosen Language. Press SAVE EXIT to save your information, and to go back to the previous sub menu. SETTING THE PHOTOSENSOR ...

GENERAL SETTINGS MENU SETTING THE DISPLAY From the General Settings Menu (see page 6), press DOWN and scroll down to ‘Set Display’. With ‘Set Display’ blinking, press ENTER to access the display settings. Use the UP and DOWN arrows to select your chosen setting of Automatic, On or Off. Press SAVE EXIT to save your ...

From the General Settings Menu (see page 6), press DOWN and scroll down to ‘EC fan signal’. With ‘EC fan signal’ blinking, press ENTER to access the EC fan signal settings. Use the UP and DOWN arrows to select the type of EC Fan you are using. Press SAVE EXIT to save your information, and to go back to the previous sub menu. Set ...

SETTING THE FAN TEMPERATURE From the Fan Settings Menu (as detailed on page 9), press DOWN and scroll down to ‘Set temperature’. With ‘Set temperature’ blinking, press ENTER to access the temperature settings. Use the UP and DOWN arrows to select your chosen setting of Day, Night or Bandwidth. With your chosen s ...