GHM Greisinger EASYLOG 80BIN Installation And Operating Manual

page 14 of 14 11. Device options Additional information’s for options of the EASYLOG 80BIN 11.1 ALARM With the option „ALARM“ the device has an additional switching output (NPN) for the alarm function of the device. In result of the option there are following extensions: Device connection: Alarm output assignment of jack (view on pins) GND NPN Note to included alarm connection cable: GND: back + blue NPN: brown + white EASYBus assignment of jack (view on pins) EASYBus not used Connection examples: a.) General connection diagram for a relay (w ...

page 6 of 14 4. Display and control elements 4.1 Display  Main display  Secondary display  Display element for max / min   Logg: indicates that logger is recording    BAT: signals weak battery (see chapter 7).    AL: signals an alarm state at min- imum one channel  4.2 Function of the buttons (brief description) SET (button 1) • call menu Arrow key UP (button 2) • call / delete max-value Arrow key DOWN (button 3) • call / delete min-value 5. Operation 5.1 Operating possibilities at the device - displa ...

page 10 of 14 7.3 System messages BATTERY: • display of the BAT-arrow left hand down: The EASYLOG battery is almost spent and needs to be replaced. The data recording is still active. • permanent display BAT: The battery is spent and the recording has been automatically stopped (even if at EASYBus-operation). It is still partly possible to read the measured values and to read-out the saved logger data. => Please return the logger to the manufacturer. ERROR 7: The EASYLOG has detected a system error. • remedy: Reset the error via GSOFT 40 ...

page 4 of 14 2.4 Safety guidelines This device has been designed and tested in accordance with the safety regulations for electronic devices. However, its trouble-free operation and reliability cannot be guaran- teed unless the standard safety measures and special safety advises given in this manual will be adhered to when using the device. 1. Install the displaying device according to the manufacturer's specifications and the valid standards and regulations. 2. Modifications or repairs of the device may not be performed by the customer. For mainte ...

page 14 of 14 11. Device options Additional information’s for options of the EASYLOG 80BIN 11.1 ALARM With the option „ALARM“ the device has an additional switching output (NPN) for the alarm function of the device. In result of the option there are following extensions: Device connection: Alarm output assignment of jack (view on pins) GND NPN Note to included alarm connection cable: GND: back + blue NPN: brown + white EASYBus assignment of jack (view on pins) EASYBus not used Connection examples: a.) General connection diagram for a relay (w ...

page 10 of 14 7.3 System messages BATTERY: • display of the BAT-arrow left hand down: The EASYLOG battery is almost spent and needs to be replaced. The data recording is still active. • permanent display BAT: The battery is spent and the recording has been automatically stopped (even if at EASYBus-operation). It is still partly possible to read the measured values and to read-out the saved logger data. => Please return the logger to the manufacturer. ERROR 7: The EASYLOG has detected a system error. • remedy: Reset the error via GSOFT 40 ...