Grundfos PC Tool Link Installation And Operating Instructions Manual

We Grundfos declare under our sole responsibility that the product PC Tool Link, to which this declaration relates, is in conformity with the Council Directives on the approximation of the laws of the EC Member States relating to — Electrical equipment designed for use within certain voltage limits (2006/95/EC). Standard used: EN ...

Installation and operating instructions 4 Montage- und Betriebsanleitung 12 Notice d'installation et d'entretien 20 Istruzioni di installazione e funzionamento 28 Instrucciones de instalación y funcionamiento 36 Instruções de instalação e funcionamento 44 Monterings- og driftsinstruktion 52 Руководство по монтажу и э ...

4 2. General description 4 2.1 PC Tool Link package 4 2.1.1 Contents of the CD-ROM 4 3. Communication 4 3.1 Power supply 4 3.2 Installation of virtual COM port 4 3.3 Locating virtual COM port number 5 3.4 Connectors 5 4. Functional description 5 4.1 Functions of the LEDs 6 5. Connection overview 8 6. Fault fin ...

To use the virtual COM port from a PC tool, the number assigned to the virtual COM port is needed. This information can be found from the Device Manager in Windows. Control panel > System > Hardware > Device Manager. In the Device Manager, expand the "Ports (COM & LPT)" item, and locate the "USB Serial Port" item. The v ...

Illustration Description 1 The orange LED is flashing when the PC communicates with the PC Tool Link. Otherwise, the LED is off. 2 The two red LEDs indicate communication to and from the PC. 3 The two red LEDs indicate communication to and from the Grundfos product. 4 The three yellow LEDs indicate whether an RS-232, RS-485 or TTL ...

flashing, data is transmitted from the Grundfos product to the PC. Data PC Tool Link Data RS232 TTL GENIbus (RS485) Power 3 kV Galvanic Isolation Grundfos Unit USB PC 1 2 3 ...

Product PC Tool software PC USB cable PC Tool Link Adapter cable Product- specific cable Product MP 204 PC Tool Water Utility RS-485 CU 300 PC Tool CU 300 RS-232 and adapter * CU 300 cable 1-phase MGE PC Tool E-products RS-485 or TTL 3-phase MGE, models B and C PC Tool E-products RS-485 3-phase MGE, models D and F PC Tool E-products ...

Adapter cable Product- specific cable Product Note * Supplied with the corresponding PC tool. ...

Problem Possible cause Suggested action 1 Communication has been established. The green LED goes out after a long time without communication. • The PC has suspended the PC Tool Link for power saving. • The PC is in standby mode. • Resume normal PC mode. 2 None of the yellow LEDs are on. The product- specific cable is connected. • ...