Cisco 12006 Unpacking Instructions Manual

Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA Cisco 12006 and Cisco 12406 Router Unpacking and Repacking Instructions This document contains instructions for unpacking and repackaging the Cisco 12006 and Cisco 12406 routers. After you unpack the system, refer to the Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide for more information. ...

2 Cisco 12006 and Cisco 12406 Router Unpacking and Repacking Instructions 78-16104-02 Before Unpacking the Router Figure 1 shows the Cisco 12006 or Cisco 12406 router on its shipping pallet. A fully configured system can weigh as much as 205 pounds (94 kg), not counting the additional weight of the pallet and packaging materials. Before unpacking the system, you should carefully plan the site location of the router and the metho ...

78-16104-02 Tools and Equipment Tools and Equipment You need the following items and tools: • 3/16-inch flat-blade screwdriver • 1/4-inch flat-blade screwdriver • 9/16-inch (14-mm) wrench • 10-mm wrench (open-end or socket) • Wire cutters • Pliers ...

4 Cisco 12006 and Cisco 12406 Router Unpacking and Repacking Instructions 78-16104-02 Unpacking the Router This section explains how to unpack the router from the shipping pallet. Figure 2 shows the packing material and accessory kit container. Figure 2 Unpacking the Router—Enhanced Model) 1 Pallet base 4 Plastic bag 2 Front door (enhanced model only) 5 Accessory kit tray 3 Hold-down brackets with bolts 6 Outer shipping container SLO ...

78-16104-02 Unpacking the Router Step 1 Use wire cutters to cut the plastic bands that secure the router to the pallet. Step 2 Remove the tape that seals the shipping container and open the top of the box. Step 3 Lift out the accessory kit and set it aside (see Figure 2). Step 4 Remove the shipping container, the plastic bag, and all of the packing materials and set them aside. ...

6 Cisco 12006 and Cisco 12406 Router Unpacking and Repacking Instructions 78-16104-02 Step 5 Remove the bolts and screws that secure the two front anchor clips and side angle brackets to the pallet (Figure 3). If you are installing the enhanced version of the 12404 Internet router, go to Step 6. For all other models, go to Step 8. Figure 3 Removing the Router from the Shipping Pallet—Enhanced Model) SLOT-0 GIGABIT ROUTE PROCESSOR SLO ...

78-16104-02 Unpacking the Router Step 6 Cut the plastic tie-wrap and remove it from the upper left hinge bracket (Figure 4). Note The plastic tie-wrap secures the front door to the chassis during shipment. Figure 4 Removing the Tie-Wrap and Label 149690 REMOVE TIE WRAP ...

8 Cisco 12006 and Cisco 12406 Router Unpacking and Repacking Instructions 78-16104-02 Step 7 Open the front door and remove the labels (labeled REMOVE) that protect the rubber bumpers during shipment (Figure 5). Close the front door. Figure 5 Removing the Rubber Bumper Shipping Label Step 8 Your Cisco router is ready for installation. For installation instructions, see the Cisco 12006 and Cisco 12406 Router Installation and Configurati ...

78-16104-02 Repacking the Router Repacking the Router This section describes how to repack your Cisco router into the shipping container. This procedure assumes you have the pallet, packing material, and hardware you saved when the chassis was unpacked. Note If the original packing kit—consisting of the pallet base, hold-down brackets, bolts, screws, plastic bag cover, packing ma ...

10 Cisco 12006 and Cisco 12406 Router Unpacking and Repacking Instructions 78-16104-02 Transporting the Router The shipping package for the router is engineered to reduce the potential of product damage during shipment. To minimize potential damage to the product, transport the router in its Cisco specified packaging. Failure to do so may result in damage to the router or degradation of its performance. Do not ...

78-16104-02 Obtaining Documentation Product Documentation DVD Cisco documentation and additional literature are available in the Product Documentation DVD package, which may have shipped with your product. The Product Documentation DVD is updated regularly and may be more current than printed documentation. The Product Documentation DVD is a comprehensive library of technical prod ...

78-16104-02 • Nonregistered Cisco.com users can order documentation through a local account representative by calling Cisco Systems Corporate Headquarters (California, USA) at 408 526-7208 or, elsewhere in North America, by calling 1 800 553-NETS (6387). Documentation Feedback You can rate and provide feedback about Cisco technical documents by completing th ...

78-16104-02 Obtaining Technical Assistance Access to all tools on the Cisco Technical Support & Documentation website requires a Cisco.com user ID and password. If you have a valid service contract but do not have a user ID or password, you can register at this URL: http://tools.cisco.com/RPF/register/register.do Note Use the Cisco Product Identification (CPI) tool to locate your ...

14 Cisco 12006 and Cisco 12406 Router Unpacking and Repacking Instructions 78-16104-02 For a complete list of Cisco TAC contacts, go to this URL: http://www.cisco.com/techsupport/contacts Definitions of Service Request Severity To ensure that all service requests are reported in a standard format, Cisco has established severity definitions. Severity 1 (S1)—Your network is “down,” or there is a critica ...

78-16104-02 Obtaining Additional Publications and Information • Packet magazine is the Cisco Systems technical user magazine for maximizing Internet and networking investments. Each quarter, Packet delivers coverage of the latest industry trends, technology breakthroughs, and Cisco products and solutions, as well as network deployment and troubleshooting tips, configuration exam ...

16 Cisco 12006 and Cisco 12406 Router Unpacking and Repacking Instructions 78-16104-02 This document is to be used in conjunction with the Cisco 12006 and Cisco 12406 Router Installation and Configuration Guide. Copyright © 2006 Cisco Systems, Inc. All rights reserved. CCVP, the Cisco logo, and the Cisco Square Bridge logo are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Lea ...