Cisco WRT54G Quick Installation Manual

® Model No. Wireless Quick Installation Guide Model No. WRT54G (EU/LA/UK) Wireless-G Package Contents • Wireless-G Broadband Router • Setup CD-ROM with User Guide • Power Adapter • Ethernet Network Cable • Quick Installation (some models may only have the Quick Installation on the Setup CD) 24, GHz 802. ...

devices. B Locate an optimum location for the Router. The best place for the Router is usually at the center of your wireless network, with line of sight to all of your mobile stations. C Fix the direction of the antennas. Normally, the higher you place the antennas, the better the performance will be. D Connect a standard Etherne ...

modem. G Connect the AC power adapter to the Router’s Power port and the other end into an electrical outlet. H Power on the PC you wish to use to configure the Router. Proceed to Step 2. IMPORTANT: Make sure you use the power adapter that is supplied with the Router. Use of a different power adapter could damage the Router. G ...

http://192.168.1.1 in its Address field. Press the Enter key. B A password request screen will appear. Leave the User name field blank, and enter the default password, admin, in the Password field. (For added security, you should later set a new password, using the Administration tab’s Management screen of the Web-based U ...

Type setting, six connection types are offered through the drop-down menu, five of which are covered here. Each Setup screen and available features will differ depending on which connection type you select. Internet Configuration Type Automatic Configuration - DHCP: If you are connecting through DHCP or a dynamic IP address fr ...

Europe only. Complete the Internet IP Address, Subnet Mask, and Gateway fields. Complete the User Name and Password fields. Select Keep Alive if you always want to be connected to your ISP, or select Connect on Demand if you are charged for the time that you are connected to your ISP. Telstra: Telstra is a service used in Au ...

Mode: Mixed: If your network has Wireless-G and Wireless-B devices, then keep the default setting, Mixed. G-Only: If your network only has Wireless-G devices, select G-Only. B-Only: If your network only has Wireless-B devices, select B-Only. Disable: If you want to disable wireless networking, select Disable. H Wireless Netw ...

wireless clients survey the local area for wireless networks to associate with, they will detect the SSID broadcast by the Router. To broadcast the Router's SSID, keep the default setting, Enable. If you do not want to broadcast the Router's SSID, then select Disable. K Change these settings as described here and click the S ...

four types of wireless security: WEP, WPA Pre-Shared, WPA RADIUS, and RADIUS. These security methods are not enabled right out of the box, however. To configure wireless security on the Router, do the following: A Open the Router’s Web Utility as shown in Step 2, and click the Wireless tab. The Basic Wireless Settings scr ...

two encryption methods, TKIP and AES, with dynamic encryption keys. Select the type of algorithm, TKIP or AES. Enter a WPA Shared Key of 8-63 characters. Then enter a Group Key Renewal period, which instructs the Router how often it should change the encryption keys. D Click the Save Settings button. Congratulations! Wireless ...