Axis 1114-1 Assembly And Usage Manual
Text of Axis 1114-1 Assembly And Usage Manual
Axis 1114-1 Chainstitch Embroidery Machine
Assembly and Usage Guide
If you are facing an operation problem, please describe your
situation via our contact info below! Thank you!
Let Us Assist You!
●
Email:[email protected]
●
Video Call
●
Whatsapp: +8618967602717
●
WeChat : Tomsewing
●
Service time: Mon. - Sun.8:00 – 20:00 UTC+8
Install the handle crank using the hardware provided.
The screw of needle bar holder and needle hook and handle
crank should be in the “6 clock direction”, or facing user. This
is an important step to properly setting up the machine! See
pictures on next page below for reference!
Picture below displays where to unscrew to adjust position of
nee
Picture bellows showing needle hook in 6 o clock position
(facing same direction as handle crank)
When setting up the machine handle wheel, it should run
clockwise! Belt should run smoothly with no obstructions! Tighten
belt until it is secure, but do not over tighten! If belt is too loose,
adjustments can be made to reach ideal setting.