Fujitsu F2MC-8FX Series Setup Manual

The Fujitsu Limited reorganized its LSI business into a wholly owned subsidiary, the Fujitsu Microelectronics Limited on March 21, 2008. The corporate names “Fujitsu” and “Fujitsu Limited” described all in this document have been revised to the “Fujitsu Microelectronics Limited”. Thank you for your coopera ...

MB2146-401-01A SETUP GUIDE ...

01A)*2. This product is a starter kit for F2MC-8FX MB95FV100D-101 (ver. 3V), which comes with MB2146-09A-E (F2MC Family BGM Adapter)*3, MB2146-301A-E (F2MC-8FX Family MCU Board for MB95FV100D-101)*4, MB2146-401 (F2MC-8FX Family Evaluation Board)*5, and F2MC-8L/ ...

The following precautions apply to the product described in this manual. WARNING Indicates a potentially hazardous situation which, if not avoided appropriately, could result in death or serious injury and/or a fault in the user’s system. Electric shock, Damage Before performing any operation descri ...

• The contents of this document are subject to change without notice. Customers are advised to consult with sales representatives before ordering. • The information, such as descriptions of function and application circuit examples, in this document are presented sole- ly for the purpose of referen ...

Before using the product, make sure that the following components are included: • MB2146-09A-E*1 : 1 • MB2146-301A-E*2 : 1 • MB2146-401*3 : 1 • F2MC-8L/8FX Family SOFTUNE Professional Pack Evaluation Version*4 : 1 • Setup Guide(Japanese version) : 1 • Setup Guide(English version, this manual) : 1 *1 : To use th ...

operation before including F2MC-8FX in a user's system.By carrying out additional purchase of the header board, continuation use also of the evaluation with a user's system can be carried out. Below, the feature of the BGM debugger for F2MC-8FX is sh ...

This section describes how to configure the MCU Board and the Evaluation Board. ■ Configuring MCU Board Set the following switches on the MCU Board, referring to "Figure 1 MCU Board Configuration". Figure 1 MCU board configuration BGM ADAPTER SUB CLOCK C B A 1 2 CLK CLK S.V. APB8 C X0 X1 X0A X1A 7 6 5 4 3 2 1 0 F ...

Set the following switches on the Evaluation Board, referring to "Figure 2 Evaluation Board Con- figurarion". Figure 2 Evaluation board configuration SW1 JP6 JP5 JP3 JP4 1 2 119 120 1 2 119 120 CN3 JP1 JP2 CN4 PJ1 SW2 JP7 CN2 CN1 JP8 +3.3V +5V (1) (2) (3) (1) 5V/3.3V Power supply selector jumper plug Set the value to the s ...

This section describes how to connect the MCU Board, the Evaluation Board, and the BGM Adapter. This section also describes how to mount the crystal oscillator on the MCU Board, and how to plug the AC adapter into the Evaluation Board. ■ Connecting MCU Board and Evaluation Board Connect the MCU Board and the Evaluation Boar ...