Avtec Scout NENA Configuration Manual

This document is confidential. Phone: 1-803.358.3600 • Fax: 1-803.358.3636 100 Innovation Place • Lexington SC 29072 USA avtecinc.com Scout™ Configuration Guide NENA/Deskset for Hardware Media Workstation ...

100 Innovation Place • Lexington SC 29072 USA avtecinc.com • [email protected] Copyright  © 2021 by Avtec, LLC. All rights reserved. This document contains proprietary information that is protected by copyright. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any ...

100 Innovation Place • Lexington SC 29072 USA avtecinc.com • [email protected] Contents Introduction 1 NENA Radio/Telephone Headset Interface 1 Installing the Jack Box 2 Software Configuration 2 Configuring an 1101 Jack Box 2 Configuring a 12xx/50xx Jack Box 4 Configuring the External Audio Interface 6 Conf ...

100 Innovation Place • Lexington SC 29072 USA avtecinc.com • [email protected] Introduction NENA Radio/Telephone Headset Interface NOTE This guide is for the Hardware Media Workstation. See Avtec's USB NENA Jack Box Configuration Guide for information on configuring the USB NENA Jack Box for the Software ...

100 Innovation Place • Lexington SC 29072 USA avtecinc.com • [email protected] Installing the Jack Box Connectors located on the rear of the Media Workstation Plus provide for headset jack boxes, desktop microphone, dual or single footswitches, select and unselect speakers, call recorders, and a connection f ...

100 Innovation Place • Lexington SC 29072 USA avtecinc.com • [email protected] 4. In the Jack Box Name field, enter a name for the jack box. The name is used to identify this jack box from other audio devices configured on this console. 5. Under the AP Port Settings section, from the AP Port dropdown, assign ...

100 Innovation Place • Lexington SC 29072 USA avtecinc.com • [email protected] 17. Under the Audio Routing section, in fields SELECT through UNSELECT10, select the channels where the jack box receives audio. For more information, see "Configuring Audio Routing" in the Scout Manager Online Help. 18. In the Ex ...

100 Innovation Place • Lexington SC 29072 USA avtecinc.com • [email protected] with the Microphone Sensitivity setting to configure transmit audio. Adjust the Microphone Sensitivity to achieve audio quality and then Input Gain to add volume. Too much Input Gain, however, can cause audio to be distorted. 7. F ...

100 Innovation Place • Lexington SC 29072 USA avtecinc.com • [email protected] 13. In the Maximum Ear Level field, enter the loudest level of audio that the jack box produces by adjusting the volume knob on the jack box. Range: 0 to 15. Default: 12. 14. From the Minimum Ear Level dropdown, select the lowest ...

100 Innovation Place • Lexington SC 29072 USA avtecinc.com • [email protected] The External Audio Interface page displays. 4. In the Device Name field, enter a name for the external audio interface. The name is used to identify this external audio interface from other audio devices configured on this console ...