Hettich HettCube 200 Operating Manual

Read the instructions prior to performing any task! Translation of the original operating manual HettCube Operating manual 1 / 173 en 12.2020 / Rev. 01 AB66006 ...

AB66006 2 / 173 Andreas Hettich GmbH & Co. KG Föhrenstraße 12 D-78532 Tuttlingen/Germany +49 (0)7461/705-0 +49 (0)7461/705-1125 [email protected], [email protected] www.hettichlab.com © 2019 ...

en 12.2020 / Rev. 01 AB66006 Table of contents Table of contents 1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.1 Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1.2 Symbol on the shipping carton label. . . . . . . . . . . . . 10 1.3 Personal protective equipment. . . . . . ...

AB66006 4 / 173 Table of contents 6.6 Switching on the incubator. . . . . . . . . . . . . . . . . . . . 46 6.7 Initialization. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 6.8 Operating modes. . . . . . . . . . . . . . . . . . . . . . . . . . . 47 6.8.1 Functional description of standstill mode. . . . . . . . 47 6.8.2 ...

en 12.2020 / Rev. 01 AB66006 Table of contents 6.13.18 Admin access. . . . . . . . . . . . . . . . . . . . . . . . . . . 115 6.13.19 Service dashboard. . . . . . . . . . . . . . . . . . . . . . . . 118 6.14 Heat compensation. . . . . . . . . . . . . . . . . . . . . . . . 118 7 Cleaning, disinfection and maintenance. . . . . . . . . . . . . . . 120 7. ...

AB66006 6 / 173 Table of contents B.6 External devices are integrated in program mode, e.g. DAY/NIGHT simulation.. . . . . . . . . . . . . . . . . . . . 163 B.7 Combination of standstill mode with incubation mode (energy-saving mode). . . . . . . . . . . . . . . . . . . . . . 164 B.8 Incubator is always cleaned on Wednesdays due to the l ...

en 12.2020 / Rev. 01 AB66006 Introduction Signal words Warning categories General symbols 1 Introduction 1.1 Symbols Signal word Meaning DANGER This combination of symbol and signal word indicates an immediate dan- gerous situation that will result in death or serious injury if it is not avoided. WARNING This combination of symbol and signal word ind ...

AB66006 8 / 173 Introduction Symbols on the incubator Cross references are indicated as follows:  Chapter 1.1 ‘Symbols’ on page 7 Warnings/symbols on the incubator which are no longer recognizable should be immediately replaced by the operating company. The images shown in the following depict the posi- tions of the warnings and ...

en 12.2020 / Rev. 01 AB66006 Introduction Attention, general danger point Nonobservance of this warning can lead to material damage and personal injury. Before using the incubator, make sure you read the operating instructions and observe the safety information. Attention: Biohazard Nonobservance of this warning can lead to personal injury. Before us ...

AB66006 10 / 173 Introduction Symbol for potential-free alarm output This symbol indicates the potential-free alarm output. Symbol for fuse (for Switchboard option only) This symbol indicates the fuse 6F1 (for Switchboard option only). Symbol for analogue output for independent temperature measure- ment (option) This symbol indicates the ...