Audio Valve Assistent 50 Instruction

Text of Audio Valve Assistent 50 Instruction

owner - manual

Assistent 50 Intergrated Stereo class -a tetrode tube amplifier This handcrafted product was special made for your high demands, to display the music on its finest way. We guarantee, that this amplifier was carefully produced and tested in all details. _________________________________________________________ Congratulations on your decision to become the proud owner of the AUDIO VALVE Assistent 50 amplifier.

Assistent 50 integrated tube amplifier_____________________

This manual has been prepared to help you understand the operation of your amplifier and to provide some information about its design and the variety of ways it may be used. We have designed and manufactured this amplifier to faithfully and accurately reproduce music. This hand build instrument should give a lifetime of pleasure and with a little care and a full understanding of th
Assistent 50 integrated tube amplifier_____________________ Do not place this amplifier in any position where liquids or any foreign material may accidentally enter it. Do not disconnect any in / output wire, while the amplifier is operating. Do not connect any voltage source short circuit, earth / ground or appliance (other than suitable HiFi quality loudspeakers ) to any output terminal. Some preamplifiers, processor, CD players etc produc
Assistent 50 integrated tube amplifier_____________________ FRONT PANEL Beside the volume knob there are no manual handlings on the front panel. The Assistent 50 is purely remote controlled designed, this includes also the volume control. The front panel of the Assistent 50 is spitted in 3 sections: On the left side is the display for the 5 input sources. The chosen input is indicated by a blue light. When the Assistent 50 is in the Mute func
Assistent 50 integrated tube amplifier_____________________ The volume potentiometer with the heavy knob is the third section on the right side. Also this section is displaying in a blue light while in operate mode. The volume is remote controlled, but has also the possibility of manual use. By the use of the remote control the scala illumination is getting darker while the motor potentiometer is turning. REAR PANEL MAIN VOLTAGE and Main P
Assistent 50 integrated tube amplifier_____________________ INPUT TERMINALS The 5 RCA INPUTs are standard RCA terminals for the use of unbalanced input signals coming from most signal sources . SPEAKER TERMINALS Speaker terminals - 8 Ohm - are located on the left rear panal, close to the input sources. Two pairs of heavy duty gold plated binding posts for each cannel are supplied. CONNECT your loudspeaker positive terminal to the amplifie

integrated tube amplifier_____________________

INSTALLATION AND OPERATION MAINS VOLTAGE CHECK that the mains voltage printed on the rear of this amplifier is similar to the mains voltage normaly supplied to your area. If indoupt, please consult your AUDIOVALVE dealer. Please notice that you never exceed the mains voltage in the prescribed value shown at the lable of the serial number on the rear side. If you can`t provide the amplifier

Audio Valve Amplifier Owners Instructions: