GeoVision GV-NVR System Lite Quick Start Manual

Quick Start Guide GV-NVR System Lite Firmware V1.7 © 2012 GeoVision, Inc. All rights reserved. All GeoVision Products are manufactured in Taiwan. The Vision of Security Basic Installation 11 RoHS LAN Left Side 4 5 7 Thank you for purchasing GV-NVR System Lite. This guide is designed to assist the new user in getting immediate results from ...

IP cameras with the default settings. You can then choose to set up the channels automatically or manually. With automatic setup, the GV IP cameras will be randomly assigned an IP address and displayed on the main screen without any further configuration. ● For automatic setup, see 5. ...

● GV-NVR System Lite x 1 ● AC Power Cord x 1 ● Power Adapter x 1 ● Base Stand Kit (1 Base Stand Screw included) x 1 ● VESA Monitor Mount Kit (1 Stand Screw and 4 Fix Screws included) x 1 ● GV-NVR System Lite Quick Start Guide x 1 ● GV-NVR Lite dongle for third-party IP camera (optional) ● Connect up to 8 GV IP camera ...

2. Tighten the base stand screw. 1. Using the 4 fix screws, tighten the VESA monitor mount on the back of the computer monitor. 2. Attach the GV-NVR System Lite to the VESA monitor mount. 3. Tighten the stand screw. Mounting Method 44 Note: 1. The randomly assigned IP addresses ...

● Stream Type: The GV-NVR System Lite only supports a single stream when connecting to a third-party IP camera. ● Codec Type: It is highly recommended to choose H.264 for best performance. Changing the IP address of the GV IP cameras 1. From the desktop of GV-NVR System Lite, click the Program button and select VS U ...

Exiting to Windows Returning to GV-Desktop Click the Windows Start button, select All Programs, click GV-NVR, and click Key Lock Utility. The GV-NVR System Lite is protected by GV-Desktop that is limited to run the selected programs. If you need to exit to Windows desktop, follow these steps. Several resolution, aspec ratio and codec ...

Access system settings Access ViewLog to play back video Start/stop screen rotation Access remote applications Main Screen 66 Logout / Exit / Minimize Select screen divisions Select a camera for full screen mode Camera Name Date / Time / Storage Space Status indicators for remote applications Click to call up P ...

You can set each camera's recording mode individually for Motion Detection, Round-the-Clock or Day-Night. 1. Click on the main screen, click System Configure and select Camera Configure. 2. From the Camera Name drop-down list, select one camera. 3. In the Rec Control field, select Rec Video, and use the drop-do ...

1. Click on the main screen, and select Schedule Edit. 2. Select or enter the Start and End time of the schedule. 3. Select day(s). 4. Select Rec, and use the drop-down list to select Round-the-Clock or Motion Detect for recording mode. 5. Select camera(s). 6. Click Add. 7. ...

. Zoom in: Click the Zoom-in button, and then click on the area you want to magnify. Each click will increase the zoom level. . Zoom out: Click the Zoom-out button, and then click on the image to zoom out. Each click will decrease the zoom level. Rewind Play Stop Rewind to Beginning Frame-by-Frame Reverse Frame-by-Frame For ...