Clarity E713CC Operation & User’s Manual

ENSURED WHEN USING THIS PHONE. To maintain the compliance with the FCC’s RF exposure guideline, place the base unit at least 20 cm from nearby persons. To reduce the risk of fire or injury to persons, read and follow these instructions. 1. Read and understand all instructions. 2. Follow all warnings and ...

removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the appliance is subsequently used. 14. Unplug this product from the wall outlet and refer servicing to the manufacturer under the following conditions: w ...

temporary or permanent damage to your hearing. Although there is no single volume setting that is appropriate for everyone, you should always use your tele- phone with the volume set at moderate levels and avoid prolonged exposure to high volume sound levels. The louder the volu ...

• Answering Machine base station with corded handset • AC power adapter for Answering Machine base station • Telephone line cord for Answering Machine base station • Cordless Handset • Charging base for cordless handset • Belt clip for cordless handset • (2) Rechargeable batteries for cordless hand ...

1 – Connect the corded handset to the base station as shown below. 2 – Plug the power supply cord into the jack located on the back of the base station. Plug the other end of power supply line cord into an electrical outlet. Always use the cables provided in the box. WARNINGS: Use only the power adapt ...

19 18 17 15 14 12 11 10 9 8 7 13 16 6 5 2 1 4 3 GETTING TO KNOW YOUR CORDED BASE ...

1 RINGER INDICATION • Flashes when ringing. • In idle mode: ON if Answering machine is on; OFF if Answering machine is off. 2 LCD DISPLAY 3 MEMORY KEYS • Inial mode: Long press to store the Store the number entered from idle mode. • In idle mode: Press to dial out to the number stored in the memory key. 4 CLEA ...

• In predial or editing mode: Press and hold to insert a pause. • In TAM message playback mode: Press to go back to previous message 8 DELETE (X) • In editing mode: Short press to backspace one digit, long press to clear whole strings. • In Directory list/Redial ...