ICP DAS USA tM-P8 Quick Start Manual

tM-P8 Quick Start Guide 1 Quick Start Guide for tM-P8 May 2010, Version 1.0.1 beta5 Congratulations on purchasing the tM-P8 the most popular automation solution for remote monitoring and control applications. This Quick Start Guide will provide information needed to get s ...

tM-P8 Quick Start Guide 2 1 ---------------------------------------------------------------------------------- Understanding the Hardware Specifications and Wiring Diagrams Before installing the hardware, you should have a basic understanding of hardware specification and ...

tM-P8 Quick Start Guide 3 I/O Specifications： ...

tM-P8 Quick Start Guide 4 Wire Connection： ...

tM-P8 Quick Start Guide 5 Pin Assignment ...

tM-P8 Quick Start Guide 6 Make sure the switch placed in the “Init” position. 3 ---------------------------------------------------------------------------------- Connecting to the PC and the Power Supply The tM-Series series is equipped with an RS-485 port for connec ...

tM-P8 Quick Start Guide 7 4 --------------------------------------------------------------------------------- Installing the DCON Utility The DCON Utility is an easy-to-use tool designed to enable simple configuration of I/O modules that use the DCON protocol. Step 1: Loc ...

tM-P8 Quick Start Guide 8 Step 1: Run the DCON Utility Double-click the DCON Utility shortcut on your desktop. Step 2: Use the COM1 port to communicate with the tM-Series Click the “COM Port” option from the menu and a dialog box will be displayed that will allow you ...

tM-P8 Quick Start Guide 9 Step 3: Search for the tM-Series module Click “Start Search” button from the toolbox to search for the tM-Series module. After the tM-Series module is displayed in the list, click “Stop Search” button. Step 4: Connect to the tM-Series Aft ...

tM-P8 Quick Start Guide 10 Step 5: Initialize the tM-Series module Set the “Address” field in the dialog box to 1 and then click “Setting” button to save the settings. Make sure the INIT switch is placed in the “Normal” position. 7 ---------------------------- ...