GEIGER GFU004 Operating Instructions Manual

Text of the manual

Gerhard Geiger GmbH & Co. KG | 100W0652

0221 en EN 1. General The GFU004 is a Venetian blind control for flush-mounted installation. It has connections for two external push-buttons, for the tubular motor and for the mains connection. The operation and the control installation are effected via operating button, radio transmitter, sun/ wind / rain / service

2.1 Learning a transmitter

The order sequence is specified: the first input on a transmit button receives the function UP, the second input the function DOWN. 1. Hold the transmitter to be learned directly to the receiving antenna and press a key about 3 seconds until an audible signal is emitted. The learning mode is activated. 2. Keep ho

Gerhard Geiger GmbH & Co. KG | 100W0652

0221 en EN • Upon reception of the sensor command „rain“, a retract command is triggered and a certain pre-programmed disable time starts running. During the disable time, both the „sun“ and the „twilight“ sensor are disabled. Operation in manual mode is nevertheless possible via the hand-held transmit

5. Declaration of Conformity

The Declaration of Conformity concerning this product is available on our website: www.geiger.de. 6. Connection Diagram These buttons must be potential-free. Please do not use here 230 V. This would damage the control. 7. Waste Disposal Recycling of packaging materials In the interest of environmental protectio

Gerhard Geiger GmbH & Co. KG | 100W0652

0221 en EN For technical questions, please call our service team at: +49 (0) 7142 938 333. They will be happy to assist you. Gerhard Geiger GmbH & Co. KG Schleifmühle 6 | D-74321 Bietigheim-Bissingen T +49 (0) 7142 9380 | F +49 (0) 7142 938 230 [email protected] | www.geiger.de

Other Controller Manuals