Cradlepoint MBR1000 Operation & User’s Manual
Text of the manual
CradlePoint MBR1000 | USER MANUAL _ Firmware Version 1.3.1
PAGE 2
1 Introduction..............................................................................................................3
1.1 Package Contents...........................................................................................3
1.2 System Requirements................................
CradlePoint MBR1000 | USER MANUAL _ Firmware Version 1.3.1
PAGE
1. Introduction
1.1 Package Contents
• CradlePoint MBR1000 Mobile Broadband Router
• AC power adapter (WARNING: using a power adapter other
than the one provided may damage the MBR1000 and will void
the warranty)
• Category 5 (CAT5) Ethernet cable
• Quick Start Guide
• Wall-mounting
CradlePoint MBR1000 | USER MANUAL _ Firmware Version 1.3.1
PAGE
1.3 MBR1000 Overview
• Avoid service disruptions. The MBR1000 has the unique ability to access high-speed cellular data networks (via a user-provided EVDO or HSDPA
handset1), so if your DSL or Cable service is interrupted, the MBR1000 will automatically failover to its high-speed cellular
CradlePoint MBR1000 | USER MANUAL _ Firmware Version 1.3.1
PAGE
2. Hardware
2.1 Ports
Wired WAN Port
Provides a hard-wired
Ethernet port for WAN
connections.
2 USB Host Connectors
Provide data connection
points for cellular hand-
sets and modems
LAN 1-4
4 Ethernet LAN ports for
local wired connections
ExpressCard Slot
For phone modem cards
(supports all 34
CradlePoint MBR1000 | USER MANUAL _ Firmware Version 1.3.1
PAGE
2.2 LEDs
Power
Green when
power is on, unlit
when power is off
LAN1-4
Green when cable plugged
in and link status is up, unlit
when no connection(s)
WAN1
Green when cable is plugged
in and link status is up, unlit
when no connection
WPS (Wi-Fi Protected Setup)
Indicates that a WPS negotiation
CradlePoint MBR1000 | USER MANUAL _ Firmware Version 1.3.1
PAGE
3. Quick Start
3.1 Hardware Connections
1. Power. Plug AC Power Adapter into
MBR1000 and a 110V AC outlet.
2. Wired WAN. Connect your DSL/Cable
Modem to the blue WAN port on the
MBR1000 using a CAT 5 Ethernet cable.
3. Wireless/Cellular WAN. Insert a USB
Mobile Broadband Adapter or Express
CradlePoint MBR1000 | USER MANUAL _ Firmware Version 1.3.1
PAGE
3.2 Wireless Internet Connection
6. Wireless Network Connection. On a Wi-Fi-enabled computer or device, open the
View Wireless Networks window and click on the MBR1000. Next, click on the Con-
nect button in the bottom right corner of the window.
If more than one MBR1000 wireless router
CradlePoint MBR1000 | USER MANUAL _ Firmware Version 1.3.1
PAGE 9
7. Setting Up Wireless Network Security (continued). After you are logged in, click on
the BASIC menu tab at the top of the setup window. Next, click the Launch Setup
Wizard button in the middle of the screen.
Follow the instructions in the Setup Wizard to complete the setup (Basic > Wiza