IC Realtime HD-AVS Quick Start Manual
Text of the manual
Quick Start Guide
HD-AVS Panoramic
Bullet Camera
Features and Specifications
A.
Overview
B.
Cable Interface
Camera Installation
A.
Installation Steps
B.
Lens Adjustment
C.
Waterproofing Connectors
FAQ and Lightning Protection
A.
Dip Switch Settings
B.
FAQ
2
2
3-4
4
4
5
6
Table Of Contents
www.icrealtime.com
IMPORTANT SAFEGUARDS AND WARNINGS
Electrical Safe
This series Panoramic Bullet camera utilizes High Definition
Advanced
Video
System
(HD-AVS)
technology,
an
HD-over-coaxial cable video standard that allows long-distance,
HD transmission of video, audio, and control functions. The
panoramic technology allows the multiple lens on the camera to
be viewed as one continuous image. Most camera model
2A. INSTALLATION STEPS
3 | www.icrealtime.com
Step 1 Place the installation map on the mounting surface in
accordance to the camera position. Drill the holes and install the
expansion screws. If necessary, drill a hole for the cable exit.
Step 2 Thread the cables through the mounting surface if necessary
or use the side exit routing on the base of the cam
4 | www.icrealtime.com
Figure 2-4
2B. OSD and Dip Switch
Locate the panel on the bottom of the camera as shown in Figure
2-6. Use the middle joystick to toggle and navigate through the OSD.
A CVBS (standard definition) port is available as well as DIP switch
configuration.
Figure 2-5
Figure 2-6
2C. Waterproofing Connectors
For outdoor installations, wat
8 | www.icrealtime.com
No image after the
Device is powered on
●
Check whether the power supply is
properly connected.
●
Check recorder video format and
resolution compatibility with Camera
●
Check whether the main power and
transformer are working normally.
Image is black and
white
●
Use the required power supply.
●
Check recorder compatibility