FireBird Multifuel Range Cooker Manual 

Page 1.0 INTRODUCTION 3 2.0 IMPORTANT SAFETY NOTES 3 3.0 TERMS & CONDITIONS OF WARRANTY 4 4.0 INSTALLATION INSTRUCTION 4.1 Performance 5 4.2 Specification 6 4.3 Health and Safety 7 4.4 Air Supply 9 4.5 Chimney/Flue 9 4.6 Installing Appliance 10 4.7 Heating and Hot Water System 11 4.8 System Controls 11 4.9 Checks before Lighting 11 ...

instruction manual is produced for the reference and guidance of qualified installation engineers such as those who are OFTEC registered (Oil Firing Technical Association). EU legislation governs the manufacture, operation and efficiency of all domestic centr ...

cooking appliances burning solid mineral fuel, is adhered to at all times.  Aerosols must not be sprayed neat the appliance while alight.  Ensure the following codes and standards are adhered to; - BS EN 15287 – 1:2007 Design, installation and commissioning of chimne ...

4.1 PERFORMANCE The following highlights the output and test performance of the range cooker: Firebird Multifuel Range Cooker Fuel Type Wood Ancit Ancit Output to Water - kW 11.1 15.4 11.5 Output to Space - kW 3.7 3.9 1.0 Efficiency - % 74.0 78.4 79.5 CO (@13% O2) 0.44 0.12 0.21 Mean Flue Gas Temp oC 302 305 252 Flue gas mass f ...

When installing the range cooker, please ensure that the following Health & Safety Regulations are met:  UK - Health and Safety at work Act 1974.  IRL - Safety, Health and Welfare at Work Act 2005, (Construction Regulations 2006). Installation, commissioning and/or servicing should only be carried out by a HETAS approved or comp ...

 Turn the handle to the side so that oil does not spill accidentally.  Don’t fill the pan more than one third full of fat or oil.  Make sure the chips are dry before putting them in the hot oil/fat.  Ensure the oil is not too hot, by first testing with one chip.  Don’t ever leave a pan on the heat unattended. � ...

of your range cooker. The air supply will ensure efficient combustion. Failure to do so could result in smoke filling into the room. Air Requirements A permanent air entry opening or openings, with a total free area of at least 550mm2 per kW of rated out ...

installation and on a regular basis thereafter. The chimney should be of sound construction, free from debris, capable of withstanding extremely high temperatures and have no evidence of cracks or other faults. Best installation practice is to install a flue lining suitab ...