Asko DBI663 SSOF Operating Instructions Manual
Text of Asko DBI663 SSOF Operating Instructions Manual
Important safety instructions
4
Before washing for the first time
6
Loading the dishwasher
9
Using the dishwasher
13
Settings
15
Care and maintenance instructions
17
Troubleshooting
20
Technical information
21
Installation instructions
25
Service
27
Notes
28
Quick start guide
Dear Customer,
Thank you for choosing this quality product from ASKO.
We hope it will meet your expectations and fulfill your needs for many years to come.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
WARNING!
When using your dishwasher, follow basic precautions, including the
following:
•
Read all instructions before using the dishwasher.
•
Use the dishwasher only for its intended function.
•
Use only detergents or wetting agents recommended for use in
a dishwasher and keep them out of the reach of children.
•
When loading items to be washed:
– locate sharp items so th
Before washing for the
first time
1. Checking water hardness
In order to achieve good dishwashing results, the dishwasher needs
soft water (water with low mineral content). Hard water leaves a white
coating on dishes and the dishwasher.
Water hardness is specified using the following scales: The German
water hardness scale (°dH) and the French water hardness scale (°fH).
A water supply with a water hardness in excess of 6°dH (9°fH) must
be softened. Th
3. Top up with rinse aid
Use rinse aid to improve wash and dry times. Also use rinse aid to
achieve clear and spotless results.
Press to open
1
Open the rinse aid compartment lid.
2
Carefully top up with rinse aid. Only add rinse aid to the level marked
max.
3
Wipe up any spilled rinse aid around the compartment.
4
Close the lid firmly.
Add rinse aid
When the rinse aid needs topping up, the above symbol lights on the
display.
After topping up, it may take
Loading the dishwasher
Energy-efficient dishwashing
Run programs only with a full load
Wait until the dishwasher is fully loaded before running a program, this
way you save energy. Use the Rinse and hold program to rinse the
dishes if there are any unpleasant odors while you wait for the
dishwasher to become fully loaded.
Run programs at a lower temperature
If the dishes are only lightly soiled, you can select a program with a
low temperature.
Select Green
Asko DBI663 SSOF The dishwasher includes a top cutlery tray, an upper basket, and a
lower basket with a cutlery basket.
The basket appearance may differ depending on the configuration.
Top cutlery tray
The top cutlery tray accommodates cutlery, ladles, whisks, and other
utensils.
Raising the top cutlery tray
1
Remove the top cutlery tray.
2
Pull the two locking handles forward on each side to raise the top
cutlery tray.
Lowering the top cutlery tray
1
Remove th
Asko DBI663 SSOF Fold-down section for small items
The cutlery basket has a fold-down section in the middle for small
items, or small shafts, such as electric whisk attachments.
Accessory
Buy an extra cutlery basket. The extra cutlery basket is flexible and
can be dismantled and attached to the lower basket or the large cutlery
basket to make an extra large cutlery basket. This accessory is
available where you bought the dishwasher.
2
1
Typical load
Recommended for daily,
Using the dishwasher
Add detergent
Press to open
1
Prewash detergent compartment
2
Main wash detergent compartment
Detergent is added according to water hardness.
Follow the instructions on the detergent packaging. This dishwasher
is fitted with a water softener, so use detergent and rinse aid doses
suitable for soft water.
Too much detergent can result in less effective dishwashing and also
entails greater environmental impact.
The detergent compartment m
Select a program mode
Select any options
Press and hold the main power switch until the display lights up.
Select the program
Starting the dishwasher
The main power switch
Press and hold the main power switch until the display turns on. Also
check that the water supply valve is on.
Select a program
To select a program, press the Navigation button
or
until the desired
program is shown on the display.
Select a program to suit t
Asko DBI663 SSOF When you select Delayed Start, the dishwasher will start 1-24 hours
after you have pressed the button Start/Stop and closed the door.
1
Press the button once to activate Delayed Start. Press the button
several times – or hold it in – to set the desired number of hours.
2
Press Start/Stop and close the door. The timer counts down and
the dishwasher starts after the selected delay.
If you want to cancel the Delayed Start option, open the do
Consumption values 1)
Final rinse
Number of
rinses
Main wash
Prewashes
Detergent,
compartment 2
(ml)
Program
Water cons.
(gallon)
Hot water 3)
Cold water 2)
Energy
(approx. kWh)
Dishwashing
time
(approx.
hrs:min)
Energy
(approx. kWh)
Dishwashing
time
(approx.
hrs:min)
3.2
0.5
2:10
1.0
2:30
55 °C
131 °F
2
53 °C
127 °F
2
25
Normal wash 4)
3.7
0.6
2:05
0.9
2:30
50 °C
120 °F
2
55 °C
130 °F
2
25
ECO wash
4.0
0.6
1:35
1.2
2:05
65 °C
150 °
Asko DBI663 SSOF Open the dishwasher's Settings menu
To open the dishwasher's Settings menu, press the Navigation button
or
until Settings menu is shown on the display and confirm your selection
with the mode selector
.
To exit the dishwasher's Settings menu, select Exit and confirm your selection with the mode selector
.
START
STOP
1� Language
English
Mode selector to confirm current setting
Settings
Current setting
Navigation buttons for choosing setting
Optio
Super rinse adds two extra rinses.
On/Off
Super rinse
8.
Activated in the following programs:
Normal wash
ECO wash
Sanitation wash
Plastic wash
Lower half
Upper half
Activate the setting High temperature to improve the dishwashing
results. Energy consumption is slightly increased.
On/Off
High temperature
9.
Activated in the following programs:
Normal wash
ECO wash
Sanitation wash
Plastic wash
Lower half
Upper half
Adjusting the water softe
Care and maintenance
instructions
Coarse filter
The coarse filter traps larger food particles, which cannot get past the
drain pump. Empty the coarse filter as necessary.
Coarse filter
1
Lift the coarse filter by the handle.
2
Empty the coarse filter. Remember to replace it!
Fine filter
Debris that collects on the fine filter is automatically rinsed away during
each wash. Clean the fine filter when necessary.
Fine filter
1
Turn the handle counterclockwise.
In order to inspect the drain pump, remove the colored stop on the
right in the bottom drain.
5
Turn the pump wheel located behind the drain pump stop by hand.
Carefully remove any items.
6
Replace the drain pump stop along with the fine and coarse filters.
7
Plug the machine in again.
If the dishwasher still does not start and a whirring sound is heard,
the overflow protection has been triggered.
•
Shut off the water.
•
Unplug the unit from the powe
Type of fault on the display
Clear the drain pump. See the section Care and maintenance instructions. If the problem persists,
call the Customer Care Center.
Overfilling water 1
F10
See “Water remains in the dishwasher above the filters” in the table “Problem” below. If the problem
persists, call the Customer Care Center.
Water outlet fault
F11
Check that the water supply valve is on. If the problem persists, call the Custome
Check that the dishes are not blocking the spray
arms.
The spray arms do not rotate.
The dishes are not clean.
Clean the spray arms. See the chapter Care and
maintenance instructions.
Spray arm holes or bearings blocked.
Choose a longer program.
Unsuitable dishwashing program.
Dose according to water hardness. Far too much
or far too little detergent can result in poor
dishwashing results.
Incorrect detergent dosage.
Avoid la