artisan 335 B Threading Manual

Page 4 Step 1…...Thread stand Page 5 Step 2…..Upper thread post Page 6 Step 3…..Threading Image Page 7 Step 4…..Threading Route Page 8 –11….Closer view of threading Page 12 Step 5…..Threading the libra Page13 Step 6…..Felted thread guide & center press shaft threading Page14 - 15 Step 7….. ...

need to be parallel to each other for the correct tension to be maintained. The thread will move off the spool to the back of the guide feeding from back to front. Step 1 Fig 4-1 ...

then around the pin passing thru the bottom hole as shown in image above. Fig 5-1 ...

tom tension guide opening as illus- trated above. Fig 6-1 ...

opening 2. Through lower opening under rod 3. Over and around ,pulled into top tension screw guide 4. Down and around lower tension guide 5. Over rod 6. Under and around lowest tension guide 7. Around guide all the way up past inter thread hook 8. Up through thread guide upper Fi ...

ous page 7 1. Around guide all the way up past inter thread hook. Pulling thread all the way into guide groove. Fig 9-1 ...