Cms Products UBASE2 200GB Getting Started Manual

Macintosh® OS X 10.3.9 or greater Connecting the ABSplus w/ USB2.0 Interface..................... 2 Connecting the ABSplus w/ eSATA Interface....................... 3 Connecting the ABSplus w/ FireWire® Interface.................. 4 Macintosh Software Installation........................................... 5 - 7 CMS Support....................................................................... 8 Automatic Backup System 510299.0 ...

2 1 Notebook USB Users: If your computer does not have enough power to start your ABSplus drive use the included extension cable with the additional Power Connector. The connectors are labeled DATA and POWER. You will need to use both connectors. Desktop USB User: Connect the power supply to the ABSplus drive and the AC power cable to a power outlet, and turn the ABSplus on. The blue power LED should be illuminate ...

3 1 Connect the power supply to the ABSplus drive and the AC power cable to a power outlet, and turn the ABSplus on. The blue power LED should be illuminated. 2 Connect the ABSplus eSATA cable to the eSATA port on your computer. If you cannot locate a eSATA port, you have the following options: A) Use the supplied eSATA pass through cable which requires a free PCI slot. Note. This option may not support hot swappin ...

4 1 Desktop FireWire users: Connect the power supply to the ABSplus drive and the AC power cable to a power outlet, and turn the ABSplus on. The blue power LED should be illuminated. Notebook FireWire users: FireWire ABSplus units are supplied with standard 6-Pin to 6-Pin cables. 6-Pin FireWire ports supply power and data to the ABSplus unit. 4-Pin mini-1394a FireWire connectors, found on some computers, provide ...

Activation Codes: BounceBack software requires an activation code, the code may be found on the flap of the BounceBack CD envelop shipped with the product. If you are running a virus protection program, temporarily disable it (if you can). This will increase the speed of your first backup. When the Authenticate dialog box is displayed, you will need to enter your administrator name and password. If you are usi ...

6 1 2 3 Formatting Using Apple’s Disk Utility program (found under the Go menu inside Utilities), the external backup drive may be formatted on Mac OS X. Choose Mac Extended format for all G3 or G4 systems, choose Mac OS Extended (Journaled) for all Intel-based systems. When erasing the External drive with Apple Disk Utility, be sure to select the drive and not the volume. (Selecting the drive will repartition ...

1 2 3 4 Once the software installation is complete and your system has rebooted, the BounceBack software will begin to configure your first backup. During the setup process you will be prompted to determine the target location where you will back your data up to. At the Activation Window enter your Activation code from the flap of the CD envelop. Click Yes to use a second internal hard drive or external drive as the backup device. Click ...

• The User’s Manual is integrated into the BounceBack Professional Control Center . To access the manual open the Control Center and click on the Green Question Mark. • If you would like to view the entire manual or print the manual, you will find it on the BounceBack CD. It is a pdf file entitled BB Pro V 7.1.3 User’s Manual.To get to the manual “Explore” the BounceBack CD. What do I do if I need ...