Explore Scientific WSH0002 Instruction Manual

IT ISTRUZIONI PER L’USO .............. 14 DE BEDIENUNGSANLEITUNG .......... 28 FR MODE D‘EMPLOI ....................... 42 ES MANUAL DE INSTRUCCIONES .... 56 COMPACT IN/OUT TEMPERATURE STATION WITH TIME AND ALARM OROLOGIO CON PREVISIONI METEO E PROIETTORE KOMPAKTES INNEN- /AUSSEN-THERMOMETER MIT UHRZEIT UND ALA ...

MANUAL These operating instructions are to be considered a component of the device. Please read the safety instructions and the operating instructions carefully before use. Keep these instructions for renewed use at a later date. When the device is sold or given to someone else, the instruction manual must be provided to the new owne ...

dling could trigger a short-circuit, a fire, or an explosion. • Do not disassemble the device. In the event of a defect, please contact your dealer. The dealer will contact the Service Centre and can send the device in to be repaired, if necessary. • Use only the recommended batteries. Al- w ...

time and date display. Press and hold to enter the time and date setting mode. 2. Press [ ] to show alarm time. Press and hold to enter alarm setting. 3. Press [ ] to display tempera- ture MAX/MIN, press and hold to clear max/min memory. In setting mode, press to increase one unit, ...

stop the alarm for 5 minutes. 6. Battery compartment. OUTDOOR SENSOR 1.Outdoor temperature & humidity LCD display 2. Battery compartment 3. TX (Initiate main unit search) 4. Channel switch 5. C/F switch 6 1 3 4 5 2 ...

or Date display 2. Indoor temperature 3. Outdoor temperature [ ] Temperature trend [ ] MAX / MIN temperature indicator [ ] Low battery indicator [ CH ] Channel indicator [ ] Alarm and Snooze indicator 1 2 3 ...

2. Insert 2x AAA (LR03)/1.5V batteries. Please ensure the polarities (+/-) of the batteries match upon installation. 3. Reattach the battery door. OUTDOOR SENSOR The main unit can receive data from up to 3 outdoor sensors. 1 Sensor is included with delivery. 1. Remove ...

7. If there is no action in 20 seconds, the setting will be saved and will exit the setting mode. ALARM SETTING/ADJUSTING DUAL ALARM TIME 1. Press the [ ] button to display Alarm. 2. Press and hold [ ] to enter the alarm setting mode. 3. The setting parameter will flash. 4. Press [ ] or [ ...

maximum records for the selected sensor, press [ ] repeatedly. To clear records, press and hold [ ]. SPECIFICATIONS Dimensions (Main unit): 70x40x100 mm (L x W x H) Weight (Main unit): 68 g Temperature display range: -5°C to +50°C (23°F to 122°F) Power: 2x ...

Hereby, Explore Scientific GmbH declares that the equipment type with part number: WSH0002 is in compliance with Directive: 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.bresser.de/download/WSH0002/CE/ WSH0002_CE.pdf RCM DECLARATION OF CONFORMITY The product c ...