Everfit TFK350 Instruction

Text of Everfit TFK350 Instruction

SPEED SENSOR FRAME

1 9 SPEED SENSOR 1 10 MOTOR FIXED FRAME 1 11 LEFT SIDE RAIL 1 12 RIGHT SIDE RAIL 1 13 CONSOLE FRAME 1 14 CONSOLE MAIN BODY 1 15 CONSOLE SMALL PANEL 1 16 SILICA GAS CUSHION 4 17 DECK FIX CUSHION 4 18 FRONT TUBE PLUG OF RUNNING PLATFORM 2 19 CONTROL BOARD 1 20 FILTER 1 21 CONSOLE CONTROL BOARD 1

UPRIGHTS PROTECT COVER

2 41 RIGHT UPRIGHT 1 42 LEFT UPRIGHT 1 43 SHORTCUT KEY 2 44 SHROTCUT WIRE BOARD 2 45 FOAM 2 46 SHORT KEY PRESS 4 47 HANDLEBAR TUBE PLUG 2 48 SAFETY KEY 1 49 ST4.8*16 SCREW 11 50 M8*85 ALLEN HEAD BOLT 3 51 φ8 WASHER 13 52 M8*65 ALLEN HEAD BOLT 4 53 ST4.2*15 SCREW 8 54 SIDE RAIL CUSHION 8 55 5/32 BOLTS 2 56 5/32 NO-SLIP WASHER 2 57 ST2.9*8 SCREW 4 58 M8*70 ALLEN HEAD BOLT 1 59 M8 NYLON NUT 7 60 ST4.2*20 SCREW 6 61 ST2.9*8 SCREW 9 6

HARDWARE COMPARISON CHART

For your convenience, we have identified the hardware used in the assembly of this product. The chart below is provided to help you to identify items that may be unfamiliar to you. 85 φ8 ARC WASHER 2 NO. DESCRIPTION Q'TY 69 ST4.2*15 SCREW 6 74 M8*20 ALLEN HEAD BOLT 4 77 M10*20 ALLEN HEAD BOLT 4 78 φ10 WASHER 4 80 M8*25 ALLEN HEAD BOLT 2 85 φ8 ARC WASHER 2 A 5mm SOCKET HEAD WRENCH 1 B 6mm SOCKET HEAD WRENCH 1 C LUBRICANT 1 D S

WARNING: Please put on all the screws, washers and bolts then tighten them.

STEP1: First make to connect the communication cable. Then fix the uprights on the base frame with M10*20 ALLEN HEAD BOLT 77 and Φ10 WASHER 78.. STEP2: First make to connect the communication cable. Fix the computer on the uprights with ST2.9*8 SCREW 57 、 φ8 ARC WASHER 85 and M8*25 ALLEN HEAD BOLT 80..

Fix the Upright protective cover on

the uprights with ST4.2*15 SCREW 69. Folding illustration: Folding illustration: To drop down treadmill: 1. Strike the damper. 2. Hold on to the top end covers and pull down the treadmill slowly on the ground.

To fold up treadmill:

Both hands hold on the bottom end covers and lift up the treadmill. DISTANCE TIME CALORIES PULSE SPEED

The LCD window functions as follows

1, "TIME" window: show the movement time. 2, "DIST." Distance window: shows the distance of movement 3, "CA L" calorie window: show the movement of calories consumed 4. "PULSE" Display Pulse Value 5, "SPEED" speed: display movement speed, in the start process, display 5 seconds countdown: 5, 4, 3, 2, 1; PROG. Set, the display P1 ~ P12 2.Key function: 1, "PROGRAM" button: 1.1 progr

down countdown. The corresponding window displays the default value and blinks. Press "SPEED

▲ / ▼" at this time to adjust to the desired value. Press the START key, after 5 seconds countdown, the treadmill from the lowest speed start running, press SPEED ▲ / ▼ and speed shortcut keys to adjust the speed, press INCLINE ▲, ▼ and the shortcut keys to adjust the slope, when the window value down When the meter reaches 0, the treadmill slows down t

3, user-defined program settings Description:

Each program will be divided into 20 time periods, set to complete all 20 time periods of speed and slope and run time settings, in order to start the treadmill by start button. 4. In the course of the operation can be "SPEED +", "SPEED -" to adjust the speed, when the end of a section of the operation, automatically enter the next section of the operation, the speed automatically adjusted for the set value. 4�

6.Security lock function

Any time the security lock is disconnected, the treadmill stops quickly and all data is cleared. All windows display "---". All normal operation and operation must be carried out with the safety lock closed。 7、Built-in program data table Period Program set the time / 20 time periods = up and down time of the run time 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 P01 SPEED 2 3 3 4 5 3 4 5 5 3 4 5 4 4 4 2 3 3 5 3 P02 S

Via Regione Piemonte, 32 - Zona Industriale D1

15068 - Pozzolo Formigaro (AL) - Italy www.everfit.it - [email protected]

Everfit Treadmill Owners Instructions: