DUALSUN FLASH Installation, Operation And Maintenance Instructions

maintenance instructions DualSun FLASH Version 1.3 – April 2020 Contents of this document are subject to change without notice. In case of inconsistencies or conflicts between the English version and any other versions of this document, the English version shall prevail and take control in all respects. © DualSun SAS Languages: ...

maintenance instructions DualSun FLASH Head office Manufacturing site 2 rue Marc Donadille Rue du Champ de Foire 13013 Marseille - France 01640 Jujurieux – France We reserve the right at any time to make any changes that we deem useful. © DualSun SAS Version 1.3 – April 2020 DualSun online library ...

V1.3 – April 2020 Page 2 sur 18 Table of contents 1 Introduction ................................................................................................................ 3 1.1 Symbols used in this document ................................................................................. ...

V1.3 – April 2020 Page 3 sur 18 1 Introduction 1.1 Symbols used in this document Important remark Security note Mandatory use of the safety harness during any height intervention Risk of electric shock Use of protective goggles Risk of falling Mandatory use of safety shoes Risk of falling objec ...

V1.3 – April 2020 Page 4 sur 18 1.2 General safety instructions Please read this installation manual thoroughly and in detail in order to be able to fully exploit the functionality of the product. DualSun disclaims all liability for defects and damages resulting from failure to comply with the ...

V1.3 – April 2020 Page 5 sur 18 1.3 General standards to be respected To ensure safe, ecological and economical operation, all applicable regional and national standards, rules and directives must be met, particularly those mentioned below: • IEC/EN 61215 1 and 2 Edition 1: qualification of d ...

V1.3 – April 2020 Page 6 sur 18 2 General description 2.1 General recommendations 2.1.1 Handling DualSun modules must be handled like any glass product. To avoid accidents, injuries, or damage to the module during work, the following precautions must always be followed: • Do not walk on the m ...

V1.3 – April 2020 Page 7 sur 18 2.2 Technical considerations Throughout the year, the system is exposed to external weather and natural conditions (Sun, wind, rain, hail, snow, thunderstorms, dead leaves, dust, bird droppings, etc.) that influence the performance and lifespan of the modules. To ...

V1.3 – April 2020 Page 8 sur 18 Some operating environments are not recommended for DualSun modules, and are excluded from the DualSun limited warranty: - No panel should be mounted on a site where it can be exposed to direct contact with saltwater, salt mist, acid rain, active chemical vapours ...

V1.3 – April 2020 Page 9 sur 18 3 Mechanical installation The installation of DualSun panels must be managed and carried out by trained and qualified personnel. The system must be assembled and operated according to the instructions provided, to comply with the local and national health and saf ...