Everbilt 9236061 Installation Instruction

Text of Everbilt 9236061 Installation Instruction

21 IN. UNDERMOUNT RUNNER

Questions, problems, missing parts? Before returning to the store, call Everbilt Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-305-1726 HOMEDEPOT.COM Item # Model # 1002 782 613 9236061 924 395 600

Table of Contents

Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Installation Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Is this the right drawer for my project? . . . . . . . . . . . . . . . . . 3 Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4

Please contact 1-800-305-1726 for further assistance.

Installation Options Drawer dimensions need to be met to fit slides Fits 21 in. deep drawers These slides can be installed in frameless and face frame cabinetry. Instructions for both options are provided in this manual The drawer side thickness must be 1/2 in. (13 mm) or 5/8 in. (16 mm) Please check the following points Face Frame Frameless Drawer box length Minimum / maximum inside ca

Please contact 1-800-305-1726 for further assistance.

Pre-Installation PLANNING INSTALLATION Ensure all parts listed in the Package Contents section are included and that you have the listed Tools and Materials Required on hand. TOOLS REQUIRED Pencil Drill with 3/32“ Drill bit for screws 1/4“ Drill bitt for rearhole Measuring Tape Phillips screwdriver PACKAGE CONTENTS Part Description Quantity A Left Drawer Slide 1 B Right Drawer Slide

ø 1/4” (6 mm)

depth 3/8” (10 mm) 7/16” (11 mm) 5 Dimensions Please review these diagrams and measure and mark your installation location before you begin the installation procedures. MOUNTING DIMENSIONS Inside cabinet width (ICW) Cabinet opening height 13/16" (21 mm) 1-15/32" (37 mm) CABINETRY DIMENSIONS 1 3/16" (30 mm) 1 3/16" (30 mm) 15/32"-19/32" (12-15 mm) 1 3/16" (30 mm) 7/16" (11 mm) 9/32" (7 mm) diameter of drill-hole = Ø 1/4

Face Frame Installation

1 Preparing the slides Slide plastic connector from rear bracket into the notch on the left and right drawer slides (A and B) forward, as shown. A/B 6 HOMEDEPOT.COM Please contact 1-800-305-1726 for further assistance. Cabinet front edge Minimum/maximum cabinet depth (see below) Face frame application with overlay decorative front Front gap 1/16“ (1.5 mm) Setback 3/32“ (2 mm) 3/8“ (10 mm) Inset application increases minimum

Face Frame Installation

3 Metal rear attachment set (screw-on) Set contains 2 metal rear mount rackets and 2 plastic connectors Non-handed, two-piece design For up to 50 mm (1 15/16“) depth adjustment and ± 1,5 mm (1/16“) side adjustment Additional adjustment via oblong holes Installation recommended with min. four panhead screws (F) 2 1 3 1 2 3 ** The Face Frame Bracket can also be placed upside down ** ** G G 3/8" (10 mm) 3/8" (10 mm) 5/16" (8

Please contact 1-800-305-1726 for further assistance.

Frameless Installation 2 Installing the drawer slides Attach the left and right drawer slides (A and B) to the inside of the cabinet using #6 x 5/8 in. screws (G). Ensure you leave a 1/16 in. (2 mm) space between the face of the cabinet and the start of the drawer slides. #6x5/8" (G) " 2 mm 1/16" B A 1 Frameless application Drawer box length Minimum inside cabinet depth inch mm inch mm

Everbilt Indoor Furnishing Owners Instructions: