ETC Source Four LED Series Assembly Manual

Text of ETC Source Four LED Series Assembly Manual

Copyright © Electronic Theatre Controls, Inc.

All Rights reserved. Product information and specifications subject to change. Part Number: 7060M2500-05.02 Rev B Released: July 2006 Assembly Guide Production Dates: September 2004 - Present ATTENTION: The part numbers listed in this guide may differ from the parts required for your particular Source Four fixtu

Table of Contents

T a b l e o f C o n t e n t s ETC®, Emphasis®, Expression®, Insight™, Imagine™, Focus™, Express™, Unison ®, Obsession® II, ETCNet2™, EDMX™, Source Four®, Revolution®, Sensor®, and WYSILink™ are either registered trademarks or trademarks of Electronic Theatre Controls, Inc. in the United States and other countries.

Lamp socket assembly

1 2 7060A2011 Rear housing assembly, single clutch 1 2A 7060A2020 Rear housing assembly, double clutch 1 3 7060A2012 Front barrel assembly 1 4 7060A2000-K 5° lens tube, with knob (See page 16) 1 5 7060A2001-K 10° lens tube, with knob

Source Four Assembly Guide

Lamp Socket Assembly Reference Number Part Number Description Quantity Required 1 7060A3055 Housing, socket, casting, painted 1 2 7060A3057 Socket, light baffle casting, painted 1 3 7060A4007 Knob, X-Y, lamp set 1 4 7060A4008-02 Knob, Z, lamp set w/female insert 1 5 7060A4011 Bushing, cup 1 6 7060A3011 Hub, index, casting 1 7 706

Lamp Socket Assembly

3 Assemble lamp socket Tools Required: • Open-end adjustable wrench or a 7/16” socket • Needle-nose pliers • #2 Phillips screwdriver Step 1: Set the crossbar of the retainer clip (25) under the two hooks on the clip bracket as shown in Figure 3. Step 2: Place the Tinnerman clip (18) over the retainer clip crossbar between the two

ETC Projector Owners Instructions: