Component Solution Services Verity REC02U Install Manual

Text of Component Solution Services Verity REC02U Install Manual

REC02U Mobile DVR

INSTALL MANUAL Distributed by Verity Rear Vision A division of Component Solution Services, LLC. 56600 Twin Branch Dr., Mishawaka, IN 46545 www.verityrvs.com Please read this manual completely before operating the SYSTEM 2018 Verity Rear Vision Systems / All rights reserved / Subject to Change

Component Solution Services LLC., offers the Verity

Rear Vision Systems® to meet any requirements and price point within the trucking, specialty vehicles, and RV industry. Verity Rear Vision Systems® is also home to the Supreme View® line of specialty format systems. Our standard cabled systems offer unparalleled features into the trucking and RV industries. Designed for professional drivers, Verity Rear Vision Systems develops and markets products a

Read our manual before operating

or installing. Most likely, your system came preinstalled, so the installation section would be for reference. Thank you for your purchase of our Verity Rear Vision Systems®. When installed and used properly, your REC02U is designed to deliver you years of trouble-free operation. This manual contains important information required to properly install and operate the unit. Verity Rear Vision Systems are

Do not place heavy objects on cables or cover

them with carpet or mats.  Do not place cables where they can be crushed in any manner.  Our systems are designed as a driving aid. Watching videos, broadcasts, DVDs and/or any images other than intended driving assistance cameras is prohibited. CAUTION  To avoid damage to the electronic circuit, stop using this product while doing welding work to the vehicle and/or trailers.  Never imme

SYSTEM FEATURES Description Picture Quantity MDVR 1 Power cable 1 I/O cable 1 AV cable 1 Remote control 1 DVR Key 1 IR Extension cable (Optional) 0

The batteries for the remote are not included or installed. 2 “AAA”

batteries are needed. ESCAPE UP / DOWN RIGHT / LEFT ENTER / SELECT PLEASE NOTE: DVRs have been setup for 1- camera systems to be used with Verity SM07J & SM05J systems.

Click the menu button on the remote; the login interface will appear.

Please input your UserName, Password, and select your language, click “OK” to login the menu. (The default UserName is admin, without Password). If you have not set these values you can use the right arrow button to pass through these. Once you have passed this step the menu button will bring up the following drop-down menu One View: 1 Camera option Multi View: Show multi

Component Solution Services Verity REC02U Pin Out Definition

Pin out for Power, I/O, AV Input & Output. Power interface I/O Interface definition PIN Color Definition PIN Color Definition 1 Blue Alarm output 2 Black Ground 3 Purple Alarm input 2 (Positive) 4 Purple Alarm input 1 5 Purple Alarm input 4 (Positive) 6 Purple Alarm input 3 7 Red 5V Output 8 White TXD(TTL Level) 9 Grey IR Extension 10 Yellow RXD(TTL Level)

Insert the key into the hole of the lock on the front panel and switch it to

OPEN status you will see the HDD 2.5” drive slot. HDD Installation Remove retaining screws for the hard disk.

Insert the hard drive into the bracket as shown below and secure the 4

fixed screws. (These screws were shipped with the DVR and are in the accessory box.) Insert the mounting bracket of the hard disk into the case and lock the fixed screws on both sides. If you want to install the SD card too, the SD card contacts are inserted into the case facing down.

Please connect the power as indicated.

Positive pole (RED) connects with power input 10-36V DC, ACC ignition (YELLOW) connects with 5-36V DC. Negative to proper grounding post DC Chassis Ground DC 12 v Hot 12 v Accessory Hot The yellow ignition wire is used to detect the ignition signal. We strongly suggest you connect it with the “RUN” terminal of the ignition switch. Connect Cameras to Camera harness. Monitor connection

Verity Rear Vision Systems

A division of COMPONENT SOLUTION SERVICES (CSS) LIMITED ONE (1) YEAR WARRANTY 1. CSS products’ warranties are not transferable. The warranties apply to the retail consumer for one (1) year and covers against defects in material and workmanship. 2. Defective components will be replaced or repaired, based on a CSS evaluation of the component. In-bound shipping charges, based on the CSS rate allocated in the RMA (returned merchan

A service ticket can be filled out on line to supply the quickest

service. The service ticket can be easly found on our web site www.verityrvs.com or use the code to the right. Please have the serial number of the system which is found on the back of the monitor when contacting the service department. We take great pride in delivering the most dependable product in the industry. Each item was 100% QC tested and then we randomly rechec

Component Solution Services DVR Owners Instructions: