ennoLogic eH710T Operation & User’s Manual

Made in China User Manual Version 2.2. Revised 10/2/2020. © 2020 ennoLogic®. All rights reserved. https://ennologic.com ...

1. Overview ..................................................... 1 1.1 Important Safety Considerations – Please Read .... 1 1.2 LCD Display .................................................................. 2 1.3 Keypad ............................................................................ 2 1.4 Battery Installation or Replacement ......................... 3 1.5 How to Use Your Moisture Meter............................. 3 Power ...

meter. This meter is a professional moisture meter that measures the water content of wood and building materials. It also measures air temperature. Please read the instructions in this manual carefully before using the moisture meter. 1.1 Important Safety Considerations – Please Read Please read these safety instructions and this user manual before using this instrument for the first t ...

1 - Hold indicator 2 - Max indicator 3 - Min indicator 4 – Moisture value 5 – Selected material indicator 6 – Wood or building material symbol 7 – Air temperature unit 8 – Air temperature value 1.3 Keypad 1 – Power button 2 – Mode button 3 – Arrow button 4 – Backlight button ...

Open the battery cover on the back of the instrument and install three 1.5V AAA batteries according to polarity indicators (alkaline batteries are recommended). Please replace the batteries when the low battery symbol appears. 1.5 How to Use Your Moisture Meter Power On/Off To turn the moisture meter on press the power button briefly, press it again to turn it off. The unit shuts off automatically after 10 minutes ...

the backlight button. 2. Choose your material setting with the arrow button. Press this button briefly multiple times to move through settings 1-7. The material number will be displayed along with one of two material symbols: (wood) or (building material). Each material setting number represents a range of materials with similar characteristics with respect to moisture measurement. Please refer ...

Note: you do not need to press any buttons to take a reading. Simply hold the pins in contact with the material and wait a few seconds for the moisture reading to change from “Lo” to a numeric value. If the material you are measuring has a very high moisture content the display will first read “HI” before settling on a value. If it remains on “HI” then the moisture content of your ma ...

the reading. Pressing the Mode button again will display the maximum moisture and temperature values since powering the unit on. Press it once more to display the minimum values. Temperature Unit Selection and Self Check To change the air temperature measurement unit to °F or °C, press and hold the power button for 3 or more seconds. When you let go the temperature unit symbol will be flashing. ...

Percentage of water content [%] Wood and building materials, see table below for details Air temperature [°C or °F] -10 ~ 50°C, + 14 ~ 122°F 2.2 Moisture measuring ranges for various materials Setting Measuring Range Material Material 1 8.8 ~ 54.8% Beech, Spruce, Larch, Birch, Cherry, Walnut, Carpet Material 2 7.0 ~ 47.9% Oak, Cedar, Maple, Ash, Douglas Fir, Meranti Material 3 0.8 ~ 22.1% Cement, Concrete, Pl ...

Moisture Sensor Electrical Resistance (Conductivity) Measurement Air Temperature Sensor NTC Temperature Sensor Resolution 0.1%; 0.1°C; 0.1°F Accuracy ±2%; ±1°C Sampling Rate 0.5s Operation Conditions -10 ~ 50°C; + 14 ~ 122°F; 10% ~ 90%RH Storage Conditions -20 ~ 60°C; -4 ~ 140°F; 10% ~ 75%RH Power Supply 3 x 1.5V AAA batteries Size 121*55.5*28mm Weight 115g (including batteries) Accessories batteries, manual, soft ca ...

https://ennologic.com/eh710t/es Manuel de l’Utilisateur en Français: https://ennologic.com/eh710t/fr Bedienungsanleitung in Deutsch: https://ennologic.com/eh710t/de Manuale d'Uso in Italiano: https://ennologic.com/eh710t/it ennoLogic.com PO Box 25207 Eugene, OR 97402 ...