Bodine BSL06M5 Installation Instructions

Text of Bodine BSL06M5 Installation Instructions

SAVE THESE INSTRUCTIONS

THIS PRODUCT CONTAINS A RECHARGEABLE LITHIUM-ION BATTERY. THE BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY. �������� CLASS 2 OUTPUT Self-Testing Emergency LED Driver READ AND FOLLOW ALL SAFETY INSTRUCTIONS ! IMPORTANT SAFEGUARDS ! WHEN USING ELECTRICAL EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED,

INSTALLING THE EMERGENCY DRIVER

> Disconnect AC power from the LED luminaire. > Mount the emergency LED driver by the mounting tabs using the supplied screws. The luminaire’s installation instructions may provide guidance on the recommended mounting location. > Mounting Height: Many factors infl uence emergency illumination levels, such as the

Applying AC power to the unit activates the unit to enable the emergency circuit, the charger circuit, and supplies power to

the control/monitor circuit and charging indicator light. When AC power fails, the emergency driver automatically switches to emergency mode, keeping the LED load illuminated at a reduced lumen output for a minimum of 90 minutes. Wh

EMERGENCY DRIVER AND AC DRIVER MUST BE FED FROM THE SAME BRANCH CIRCUIT

TYPICAL SCHEMATICS ONLY. CONSULT THE FACTORY FOR OTHER WIRING DIAGRAMS. TROUBLESHOOTING GUIDE INDICATOR LIGHT STATE ERROR CORRECTIVE ACTION 0x Flashes Light On Steady None No Action. The Unit is Operating Correctly. 2x Flashes Battery Indicates that a self-test/self-diagnostic test di

Bodine Controller Owners Instructions: