Giada G1568 Operation & User’s Manual

(Giada, JEHE’s global brand) and all rights are reserved. The company reserves the right to change this manual at any time without notification. Specifications here are for reference only, please take the real product as standard. Without official authorization ...

Table of Contents 1. Product Introduction ............................................................................................. 3 2. Interface Description and Hardware Specifications ............................................ 3 2.1 Interface Description .......................................................................................... ...

4.2.5 CSM Configuration ................................................................................... 23 4.2.6 HM Monitor & Smart Fan ........................................................................ 24 4.2.7 OEM Configuration .................................................................................. 26 4.2.8 System Devices Configu ...

1. Product Introduction Based on Intel Coffee Lake-S platform, Giada G968 and G1568 support Intel LGA1151 Socket 8th Generation processors. Featured with AMD discrete graphics card, the G968 supports 9 HDMI outputs while G1568 supports 15 HDMI outputs. With multiple outputs and powerful GPU capability, G968 and G1568 provide ideal solution for video wa ...

15 x HDMI Left I/O Port 2.2 Hardware Specifications G968 G1568 Processor CPU Intel® Coffee Lake-S Processors (TDP≤ 65W) Chipset Q370 Memory Type DDR4 – 2400MHz Socket 2 x SO-DIMM Max Capacity 32 GB ...

Graphics GPU 1 x AMD E8860 GPU with 128-bit wide, 2GB GDDR5 2 x AMD E8860 GPU with 128-bit wide, 2GB GDDR5 Graphic Engine DirectX12，OpenGL4.5, OpenGL 1.2 HDMI 9 x HDMI 2.0 (Max. 4096 x 2304 @60Hz) 15 x HDMI 2.0 (Max. 4096 x 2304 @60Hz) Network Controller Intel® WGI219LM/ I211AT Interface 2 x RJ45 I/O Interface USB 2 x USB 3.1, 1 x USB3.0, 2 x USB 2. ...

3. Accessories Installation Steps For safety reasons, please ensure that the power cord is disconnected before opening the case. How to open the cover Unscrew the six screws. Push and open the case. (SO-DIMM#1 SO-DIMM#2, M.2 for SSD, MIni PCle for 3G/4G, M.2 for Wifi/BT, 2.5’’ SATA and SIM slot) ...

3.1 CPU Installation 1. Unscrew the four screws and remove the CPU cooler. 2. Remove the hook to open the closure. 3. Put the CPU on the board and paint the top side with heat conduction grease. 4. Remove the closure and put the hook back. 5. Tighten up the four screws. 3.2 Memory Installation This product only supports DDR4 SO-DIMM memory modules. 1. ...

3.3 WIFI (M.2) Installation 1. Plug the WIFI module into the appropriate slot. 2. Secure the module to the carrier by tightening up the screw. 3. Connect the two black cables to Main and AUX. Install antennas. ...