BlacklineSafety G7 DOCK Getting Started Manual

Text of the manual

G7 Dock is Blackline’s solution to gas sensor

calibrating, bump testing and charging G7. It supports both G7c and G7x devices with single-gas, multi-gas diffusion or multi-gas pumped cartridges. Simply insert G7, and G7 Dock will do the rest. It automatically charges G7 and places it into a test-ready mode to eliminate false alerts. G7 Dock helps you keep

YOUR G7 DOCK

Gas Out exhaust Inlet stickers Activation Code Charge clip Power cable Wall mounting holes Product label Release tabs Gas inlet quick-connects Dock lid Gas valves Power light

GAS INLET CONFIGURATION

G7 Dock is equipped with a Gas Out exhaust and 4 gas inlets. The inlets are pre-programmed for you. Changes to G7 Dock’s inlet configuration can be made from your G7 Dock’s configuration profile, from the Docks page on Blackline Live. The activation code on the back of dock can be used to identify it from the list. If you are havi

Inlet 2 – Sulfur Dioxide

Inlet 3 – Ammonia Inlet 4 – Purge This inlet supplies clean air, removing residual gas from G7 Dock. When using Dock in dusty

Visit support.BlacklineSafety.com to download

the technical user manual with descriptions of how to use and configure your device and for detailed specifications. CUSTOMER CARE For technical support, please contact our Customer Care team. North America (24 hours) Toll Free: 1-877-869-7212 | [email protected] United Kingdom (8am-5pm GMT) +44 1787

CONNECTING TO GAS

Attaching G7 Dock to the gas cylinder is done through the use of tubing and quick connects. To attach the quick connects to G7 Dock: 1. Line up the quick connect ends 2. Twist clockwise until it clicks securely into place 3. Ensure the other end of the tubing is attached to a demand flow regulator on the gas cylinder 1 2

HOW G7 DOCK WORKS

Powering on Insert the power cable into the port on the bottom of G7 Dock. Feed the power cable through the tracks along the bottom to allow the dock to lie flat on a table surface or mount on a wall. When plugged in, the green light at the charge clip will turn on to indicate power. Opening G7 Dock lid To open dock’s lid, press inward on

Other Test Equipment Manuals