BlacklineSafety 102140 Setup Manual

Text of the manual

ii || GETTING STARTED GUIDE

LEGAL NOTICES Information in this document is subject to change without notice. This document is provided “as is” and Blackline Safety Corp. (“Blackline”) and its affiliated companies and partners assume no responsibility for any typographical, technical or other inaccuracies in this document. Blackline reserves the right

SELECT LOCATION BEACON PLACEMENT

5 INSTALL LOCATION BEACONS 6 PREPARE FLOOR PLANS 8 ADD LOCATION BEACON INFORMATION TO BLACKLINE LIVE 9 TEST LOCATION BEACON 10 CHANGING BATTERIES 11 SUPPORT 11

1 || GETTING STARTED GUIDE

OVERVIEW I I INDOOR LOCATION TECHNOLOGY Why indoor location technology? GPS can deliver very precise locations when used outdoors and away from large buildings. However, when working indoors GPS signals can be degraded, resulting in a reported location that is imprecise for an efficient emergency response. For many cases that invol

What are floor plans?

Floor plans greatly enhance indoor location technology, maximizing your team’s capability to respond without delays. Floor plans are added to your Blackline Live account, with employee locations displayed on top of the floor plan within the Google map. Floor plans are optional, but increase the effectiveness of Location Beacons. The

3 || GETTING STARTED GUIDE

HOW LOCATION BEACON WORKS Location Beacon Safety monitoring device Communication network Blackline Live and monitoring personnel Blackline Safety’s indoor location technology is simple and effective. It helps you map an employee’s location that cannot otherwise be determined using traditional GPS positioning technology. When a

Deploying indoor location technology within a facility is designed to be quick and easy. This guide will walk you

through the five steps necessary to get your facility set up with Location Beacons. 1. Select Location Beacon placement 2. Install Location Beacon 3. Prepare floor or site plans for Blackline Live 4. Add Location Beacon to Black

5 || GETTING STARTED GUIDE

SELECT LOCATION BEACON PLACEMENT Smaller rooms (up to 400 square feet) normally require one beacon. Larger rooms are often segmented into quadrants with four beacons. CONSIDERATIONS Some things to consider when selecting Location Beacons installation locations: IMPORTANT: Before moving on to the next step, review your Location Beac

INSTALL LOCATION BEACONS

Before selecting mounting locations for Location Beacons, consider our recommendations below for Location Beacon installation. INSTALLATION TRANSMIT POWER SETTINGS Transmit power level affects the range of Location Beacon’s signals. Beacons are shipped in the lowest transmit power setting level (Level 2), providing about 15 to 30

7 || GETTING STARTED GUIDE

TURNING LOCATION BEACON ON CONSIDERATIONS Some things to consider when installing Location Beacons: � Height of Location Beacons should be as high as practical, with minimal obstructions interfering with the signal � Beacons should always be orientated upright upon installation 10 ft. DO DO DON’T DON’T DON’T DON’T DON

Other Security System Manuals