HBM HLCM Series Mounting Instructions

Im Tiefen See 45 D-64239 Darmstadt Tel. +49 6151 803-0 Fax +49 6151 803-9100 [email protected] www.hbm.com Mat.: 7-2002.5007 DVS: A1140-4.0 HBM: public 03.2017 � Hottinger Baldwin Messtechnik GmbH. Subject to modifications. All product descriptions are for general information only. They are not to be understood as a guarantee ...

HLCM… English 1 Safety instructions 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Markings used 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.1 Symbols on the product 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 Th ...

3 1 Safety instructions In cases where a breakage would cause injury to persons or damage to equipment, the user must take appropriate safety measures (such as fall protection, overload protec­ tion, etc.). For safe and trouble‐free operation, weighing modules must not only be correctly transported, store ...

HLCM… give rise to residual dangers if they are inappropriately installed and operated by untrained personnel. Everyone involved with the installation, commissioning, maintenance or repair of a force transducer must have read and understood the Mounting Instructions and in particular the technical safety instruc ...

5 which follow. It is also essential to observe the appropriate legal and safety regulations for the application concerned. The same applies to the use of accessories. Qualified personnel means persons entrusted with the installation, fitting, commissioning and operation of the product who possess the approp ...

HLCM… 2 Markings used 2.1 Symbols on the product CE mark The CE mark enables the manufacturer to guarantee that the product complies with the requirements of the rele­ vant EC directives (the declaration of conformity is avail­ able at http://www.hbm.com/HBMdoc). 2.2 The markings used in this document Important inst ...

7 3 General HBM supplies HLCM... weighing modules with maximum capacities of 110 kg; 220 kg, 550 kg, 1.1 t, 1.76 t, 2.0 t, 2.2 t and 4.4 t. They are mainly designed for tank weigh­ ing applications and they are equipped with a lift‐off se­ curing device. The modules consist of a base plate, the load cell com­ plete ...

HLCM… 4 Mounting instructions � It should be ensured that the mounting / siting sur­ faces are clean, flat and level. Depending on the installation circumstances, any levelling error can be compensated for example by suitable wedges and compensating plates (weld on) or by grinding away the mounting surface. ...