HBM PMX Operating Manual

Messverstärkersystem Système amplificateur de mesure Bedienungsanleitung Operating manual PMX Manuel d’emploi ...

A3257−2.0 en/de/fr HBM 1 Safety instructions 6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 PMX product description 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 User information 14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...

A3257−2.0 en/de/fr HBM 7.6 TEDS transducers 56 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.6.1 TEDS connection 56 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.6.2 Starting up the TEDS module 56 . . . . . . . . . . . . . . . . . . . . . . . . . 7.6.3 PMX parameterization w ...

A3257−2.0 en/de/fr HBM 11.3.3 Measured values (cyclic) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 11.3.4 Measured value status 104 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.4 Output data, control (PLC) −> PMX . . . . . . . . . . . . . . . . . . . . . . . . . 105 11.4.1 Device data (cyclic) . ...

and directly related control tasks. Use for any purpose other than the above is deemed to be non-designated use. In the interests of safety, the device should only be operated as described in the Operating ...

reduction up to 50% at 40oC. − The device is classified in overvoltage category II, degree of pollution 2. − Install the device so that it can be disconnected from the mains at any time without difficulty. − It is safe to operate th ...

SIGNAL WORD Type of danger Consequences of non-compliance Averting the danger − Warning sign: draws attention to the danger − Signal word: indicates the severity of the danger (see table below) − Type of danger: mentions the type or source of the danger − Cons ...

Components marked with this symbol can be damaged beyond repair by electrostatic discharge. Please observe the handling instructions for components exposed to the risk of electrostatic discharge. Working safely A device must not be directly connected to the power suppl ...

up and operating the product, who possess the appropriate qualifications for their function. This device is only to be installed and used by qualified personnel strictly in accordance with the specifications and with the safety rules and re ...