Gill 7040 Assembly Instructions
Text of Gill 7040 Assembly Instructions
1.5" Sq End Plug, Black (14-20 gage)
2
2
M477
1.5" x 3" End Plug, Black, (10-14 ga)
1
3
M2015
Felt Dot, 1" dia x 1/8" thick, adhesive backed
12
4
M2861
Knob 3/8"-16 x 1", Nylon tip, black TPE, Logo
1
5
M2207
5/16"-18 x 1.5" Hex Bolt
4
6
M2273
Washer, Flat, 5/16
12
7
M1254
5/16"-18 Nylock Hex Nut
8
2008 by Gill Athletics. All rights reserved.
GILL ATH
7040 - SCHOLASTIC HIGH JUMP STANDARDS
7040_inst1
www.gillathletics.com
10/
THIS WARNING IS GIVEN IN COMPLIANCE
WITH CALIFORNIA'S PROPOSITION 65:
WARNING
This product contains chemicals known to the
State of California to cause cancer, birth defects
or other reproductive harm.
touches the wheel. The wheel should spin freely.
the nylon insert is fully engaged, but not to the point where the nut
holding the wheel on the axle. The nut should be tightened so that
in place with a second nylock nut. Do not over tighten the nut
wheel (4)
Minus clamping knob
M2861
P7040R
Knob with nylon tip
P704040L
Upright & Riser
Left side
P704040R
Upright & Riser
Right side
P7040L
Complete Standard
Complete Standard
Right side only
Left side only
Single Riser with knob
Hardware for a single standard
700160
P704005
Single Base with
wheels and hardware
GILL ATH
2008 by Gill Athletics. All rights reserved.
www.gillathletics.com
REPLACEMENT PARTS
7040_inst3
7040 - SCHOLASTIC HIGH JUMP STANDARDS